SML - Optical Line Protection
The SML-Optical Line Protection unit is able to provide fibre path redundancy on a channel by channel basis. These units are particularly well suited for protection in fibre data transmission. The solution includes monitoring capabilities for both working and protection paths. The monitoring is available through the SNMP Management unit. In case of a fibre cut in the protecting path, traffic will be switched over to the protecting path in less than 50 ms.
Features:
- 1+1 full optical protection
- Low channel cross talk < -55dB ; Low insertion loss < 6.5dB
- Latch feature, if power is lost the switch remains in its current state
- Protection transition < 50 ms
- Works with any combination of 1 ~16 wavelengths
- Traffic is switched in one of three modes : Auto, Semi-Auto, Manual
- Optical Interface Type : LC connectors
- Working and protected lines are physically separated fibre
Specifications:
Connecter: LC
LEDs: Power System, Working Path, Protection Path, Work mode
Power: DC 12V In
Restoration Time: 50ms
Range: Input PWR :+3 ~ -15dBm(TX), -2~-29dBm(RX), Detection: -5 ~ -29dBm
Loss: Insertion Loss < 6.5dB, Return Loss > 45dB
Power Consumption: <10W
Dimensions: 220 x 162 x 25mm (D x W x H)
Weight: 900g
Temperature: 0~50°C (Operating) ,20~70°C (Storage)
Humidity: 10~90% non-condensing
Certification: CE, FCC, RoHS
MTBF: 57,000 hours
