10G on 4x 2.5G Inverse Multiplexer
The 10G 4x 2.5G module is an inverse multiplexer that accepts 10 Gbps traffic (10GBE or OC-192/STM-64) on the client side and transmits that data over four 2.5 Gbps line ports. When transporting 10GBE LAN PHY traffic the Inverse Multiplexer can use one, two, three or four 2.5 Gbps line ports and implements flow control when less than four ports are used. Using CWDM or DWDM SFPs the MICROSENS inverse multiplexer can send four 2.5 Gbps wavelengths over the same fibre. Thus enabling the transport of 10 Gbps traffic to long distances even when fiber characteristics does not allow standard 10G transport. It will allow carriers to provide 10 Gbps services even when their backbone is still at 2.5 Gbps.
Features:
- Transparent 10 GBE WAN or OC-192/STM-64 transport over 4x 2.5 Gbps optical lines
- Optional RMON on 10 GBE LAN client input and output signal
- Transmission of 10G traffic over performance limited fibres with high Polarization Mode Dispersion (PMD)
- Embedded DCC for remote management
- Utilize existing 2.5G DWDM optical transport equipment
