Media Converter for Ethernet/Fast Ethernet and RS-232/422/485
For use in extremely demanding conditions our Media Converters include Ethernet (10Base-FL/10Base-T), Fast Ethernet (100Base-FX/100Base-TX), and RS-232/V.24, RS-422/V.11 and RS-485 copper/fibre optic converters are also available. A fixture integrated in the device enables direct mounting onto 35 mm DIN rails. The power supply of the converters is provided by an external 24 VDC power adapter. A second power supply can be connected to supply the devices redundantly. The Ethernet converters are equipped with a switch to change the assignment of the RJ-45 jack. Therefore, the 100Base-TX copper connection can be carried out via common 1:1 patch cables. In addition to the SUBD-9 connection, the serial converters also have parallel terminals for flexible bus installation. Floating contacts are another option. Messaging systems can be connected via special terminals in order to indicate connection failures and trigger certain actions. The fibre optic connector is located on the underside of the device. This ensures protection of the optical transceiver against dust and contamination.
Media Converter for Fast Ethernet
Media Converter for RS-232
Features:
- Robust media converter for Fast Ethernet (100 Mbps) and Ethernet (10 Mbps)
- Additional version for serial protocols RS-232/422/485 with SUB-D9 and screw terminal
- Transparent conversion of the data
- External alarm contacts
- Connection for redundant power supply
- Effective over voltage protection
Specifications:
Type: Ethernet / Fast Ethernet media converter for industrial use
Fibre type: Multimode 62,5/125 or 50/125μm, Single mode 9/125μm, duplex
Cable type: Shielded Twisted Pair cable, 100 Ohm, Category 5, Pinout RJ45-port crossable per switch, 100 m
Data rate: 10 and 100 Mbit/s
LED displays:
Power - Ready for operation
FX-Link - Fibre link
FX-Act - Data traffic on fiber
TX-Link - Twisted Pair link
TX-Act - Data traffic on Twisted Pair
Alarm - Link interrupted
Mounting: 35 mm hat rail, according DIN EN 50 022
Power supply: 18 - 36 V DC / max. 500 mA by external power supply; Connection by screw terminal, redundant connector
Dimensions: 38 x 108 x 116 mm (B x T x H)
Operating temperature: -20°C to 60°C
Storage temperature: -20°C to 80°C
Rel. humidity: 5% to 90% non condensing
