SML-2.7G 3R Transponder
The SML-2.7G is an 2.7G 3R optical regeneration device, which consists of Re-amplification, Re-shaping and Re-timing. The transponder card converts a data signal to the correct wavelength for transmission on a specific channel by supporting SFP optics on both line side and client side interfaces. When the SML-2.7G card is placed in the SML rack with SNMP management, the management can view the converter card's status, type, version, fiber link status and alarms. The card can be configured to enable or disable the port, reset the port and set the desired data rate.
Features:
- Multiple protocol supported at bit rates 28Mbps to 2.7Gbps (Fast Ethernet, Gigabit Ethernet, OC-3, OC-6, OC-12, OC-24, OC-48, STM-1, STM-4, STM-16, FC-1, FC-2)
- Network management via Web, Telnet, SNMP in central SML-5000/ 2000 chassis
- Local configuration via DB9 craft port In Stand-alone
- Digital Diagnostic monitoring of SFP module
- Perform optical repeater function (Re-amplification, Re-shaping, and Re-clocking)
- Facility loopback on both Client / Line sides
- Link Fault Pass through (LFP)
- Auto Laser Shutdown (ALS)
- Dip Switch setting data rate
- Detect fiber transmitter error Alarm
Specifications:
Optical Interface
Connector: SFP LC
Data rate: 28M to 2.7Gbps
Duplex mode: Full duplex
Fibre: MM 50/125μm, 62.5/125μm. SM 9/125μm
Distance: MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
Wavelength: MM 1310nm, SM 1310,1550nm
WDM 1310Tx/1550Rx (type A)
1550Tx/1310Rx (type B)
CWDM 1470 ~ 1610nm
Standard: IEEE 802.3, IEEE 802.3u
Indications: LED (Power, Line Link, Client Link, Test, Loop back, Port Active, Alarm)
Power Input: Card : 12VDC, Standalone : AC, DC options
Power Consumption: <18W
Dimensions: 220 x 162 x 25mm ( D x W x H)
Weight: 900g
Temperature: 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10 ~90% non-condensing
Certification: CE, FCC, LVD, RoHS
MTBF: 75,000 hrs (25°C)
