Managed Gigabit Ethernet Converter
The FRM220-1000ES-1 is a copper to fibre Gigabit Ethernet solution designed to make conversion between 10/100/1000Base-TX and 1000Base-SX/LX with SC or SFP LC connector. With SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter also supports features such as ingress/egress bandwidth control, auto or forced mode setting for copper Ethernet as well as auto laser shutdown.
Features:
- 10/100/1000Base-T to 1000Base-SX/LX SFP Managed card
- Auto-negotiation or forced mode
- Auto MDI/MDIX
- Forward 1632 bytes (max.) packets
- Support Bandwidth Control (70k ~ 250Mbps)
- Supports Flow control (Pause)
- Support Link fault pass through (LFP) function
- Supports remote CPE power fail detect (dying gasp)
- Auto Laser Shutdown (ALS)
- Online f/w upgrade
Specifications:
Optical Interface:
- Connector - 1x9 (SC) or SFP LC
- Data rate - 1000Mbps
- Duplex mode - Full duplex
- Fibre - MM 50/125μm, 62.5/125μm.
- SM 9/125μm
- Distance - MM 550m, 2km, SM 15/30/50/80/120km
- WDM 20/40/60km
- Wavelength - MM 1310nm, SM 1310,1550nm
- WDM 1310Tx/1550Rx (type A)
- 1550Tx/1310Rx (type B)
Electrical Interface:
- Connector - RJ45
- Data rate - 10Mbps, 100Mbps, 1000Mbps
- Duplex mode - Half / Full duplex
- Cable - 10Base-T Cat.3, 4, 5, UTP
- 100Base-TX Cat.5, 5e or higher
- 1000Base-T Cat.5, 5e or higher
Standard: IEEE 802.3, IEEE 802.3u
Indications: LED Power, FX-Link 1/2, LFP(1000E/ES-2F); Power, FX-Link , LFP, TX-Link, TX-SPD (1000E/ES-1)
Power Input: Card : 12VDC, Standalone : AC, DC options
Power Consumption: < 4W
Dimension: 155 x 88 x 23mm (D x W x H)
Weight: 120g
Temperature: 0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity: 10 ~ 90% non-condensing
Certification: CE, FCC, LVD, RoHS
MTBF: 65,000 hrs (25°C)
