ETU/TTU-ET100R 10/100 Base-TX Ethernet Router
The ETU/TTU-ET100R 10/100 Base-TX Ethernet Router is used when the E1/T1 standalone access units are installed with an ET100R Interface, the unit is not only an access unit for E1 or T1 but also becomes a high performance WAN Router for 10/100BASE-T Ethernet extension. The ET100R Ethernet Router interface module for our ETU/TTU Series DSU/CSU Access Units may be accessed via the RS-232 asynchronous communication port, a serial crossover cable (provided) and text based terminal emulation software (Hyper Terminal TM). Once an IP address has been established for the subnet, the ET100R may also be accessed via Telnet. The serial port and Telnet configuration menus are identical and may include password protection.
Features:
- Ethernet port IP Address/subnet mask
- WAN port IP Address/subnet mask
- Router Name / Password
- RS-232 Console Port Management
- Web/Telnet Management
- WAN port IP address/subnet mask
- DHCP server/client
- NAT Function
- Virtual Server Mapping
- SNMP MIB-2 supported
- Supports VPN pass through
- Forwarding IP multicast support
- DNS proxy server
- SNTP supported
- Simple Statistical
- Ping and Trace route
- Static Routing Setup
- Routing Table (manually set up to 32 entries minimum)
- Dynamic Routing RIP I & II, Send or Receive on Ethernet or WAN
- PPP, HDLC and Cisco HDLC WAN protocol encapsulatoin
- Flash Upgrade (via TFTP)
Specifications:
Hardware: Samsung ARM9 integrated communications 166MHz processor, 8MB Flash, and 32MB pipeline RAM for code, data and buffers
WAN Speed: Synchronous Port N56/N64 up to 2048Kbps
LAN Speed: Ethernet LAN port 10/100 Mbps
Function: Static Routing, Dynamic Routing, DHCP Client/DHCP Server, IP Mapping, Packet Filtering
Protocols: PPP, NAT, RIP 1/2, TCP/IP
Security: PAP/CHAP, NAT, Filter
LED: Link/ACT : On=link ; Flash=Activity; 100 : On=100Base ; Off=10Base
