Lanode.com

1-port E1/T1+100M Ethernet Fibre Multiplexer

The FRM220-FOM01 is a modular design for E1/T1 + Fast Ethernet multi-service to single strand fibre PDH multiplexer. FRM220-FOM01 provides E1/T1 transmission transparently, pure 100Mbps Fast Ethernet simultaneously. The fibre optic line gives you the options to choose from most popular fibre cabling connectors such as, ST, SC, FC or SFP-LC. Both multi-mode and single mode models are available as well as BiDi which allows bi-directional transmissions using only a single fibre cable with SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis.

FMUX01A/Plus 100M PDH Fibre Optic Multiplexer

The FMUX01A/Plus is a 1U, 19" rack mountable, PDH fibre optic multiplexer that transmits up to 16 channels plus a wire speed 100Base-TX Fast Ethernet channel over a single fibre optic link. The FMUX01A/Plus chassis is available in five different power configurations: single AC, single DC, dual AC, dual DC or AC+DC. The AC supplies operate from 90~260VAC while DC supplies operate from 36~72VDC or 20~60VDC. From the rear of the chassis, one to four hot swappable quad E1 or T1 line cards, serial data communications (V.35, X.21, RS-530) or FXO/FXS voice cards are supported. The standard FMUX01A/Plus configuration may be viewed or set via the front panel LCD/menu keys, serial VT-100 terminal connection, Telnet or SNMP.

FMUX01A Fibre Optic Platform Multiplexer

The FMUX01A Fibre Optic Platform Multiplexer is a 1U (1.75") high standalone or 19/23" rack mountable E1/T1/Data/LAN Bridge multiplexer over fibre link, built upon a highly flexible, modular design. The Fibre Multiplexer provides an economic optical connection solution in high-density E1 and/or T1 installations such as between branch offices, where multiple high speed synchronous data communications are required or to link a mix of platforms over a single fibre pair. By utilizing a modular design, a large variety of configurations may be realized and the unit may be easily custom tailored for each specific application when ordered. The 4-CHANNEL E1, T1, V.35 (X.21/RS-530/RS-449) data, Ethernet Bridge Port cards and optical interface cards are all optional.

Gigabit Fibre Optic Multiplexer

The FMUX1000S is an innovative gigabit multi-service fibre optic transport system which can transmit both E1/T1 and Ethernet data streams over redundant gigabit fibre optic links. The gigabit wire-speed Ethernet traffic and a separated 16 E1/T1 transparent data are multiplexed into 1.25Gbps by using a patented physical coding method to achieve a high performance and economic broadband access solution.

The FMUX1000S can be adopted as a broadband backhaul of 3G mobile networks or private network access for campus and
office building. FMUX1000S is a modular design which supports E1/T1 and combo Ethernet interface cards. There are 4 hot
swappable tributary slots equipped for each FMUX1000S system. The Ethernet tributary card is equipped with two 10/100/1000 RJ45 and two Gigabit SFP fibre ports, These 4 ports are part of 4 gigabit ports in an Ethernet switch core. For E1/T1 card, the 4 E1/T1 ports can be programmed as either E1 or T1 individually. Any combination of Ethernet and E1/T1 cards can be placed in the four plug-in slots.

The FMUX20 is a 2U high 19" Rack, 20-slot modular Fibre Optic Multiplexer rack. It provides an economic solution in high density fibre multiplexer installations in central offices. All critical components, Power, fans, management module and interface cards are hot swappable, allowing online field replacement. The hot-swappable power modules can be chosen from AC100-240V, DC18-36. or DC 36-72V. The chassis also has a pair of alarm relays and is able to stack up to 10 chassis as one management unit.

4 Channel E1/T1 Plus 100M Ethernet Multiplexer

The FMUX04E is a modular design for 4xE1 + Fast Ethernet multi-service to dual strand fibre PDH multiplexer. FMUX04E provides E1 transmission transparently, pure 100Mbps Fast Ethernet simultaneously. The fibre optic line is based on the SFP technology that allows a flexible use of Multimode or Single mode lines and enable the support of different wavelengths and distances. The use of bi-directional SFPs maximizes the utilization of the fibre optic line and results in saving line costs. The multiplexer is equipped by default with redundant AC and DC power supplies for redundant operation. With SNMP and Web-based management in the FMUX04E, the Network administrator can monitor, configure and control the activity remotely.

4-port E1/T1+ 100M Ethernet Fibre Multiplexer

The FRM220-FOM04 is a modular design for 4xE1/T1 + Fast Ethernet multi-service to dual strand fibre PDH multiplexer. FRM220-FOM04 provides E1/T1 transmission transparently, pure 100Mbps Fast Ethernet simultaneously. The fibre optic line is based on the SFP technology that allows a flexible use of Multimode or Single mode lines and enable the support of different wavelengths and distances. The use of bi-directional SFPs maximizes the utilization of the fiber optic line and results in saving line costs. The multiplexer is equipped by default with redundant AC and DC power supplies for redundant operation. With SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis.