XMP1-SL Compact 1HU Access Multiplexer
XMP1-SL Compact 1HU Access Multiplexer
The Transport Gateway XMP1-SL (Slim Line) is a compact, space saving, universal 1 HU cross-connect which provides in its basic configuration grooming and consolidation of 8x E1. It hosts 1 slot to equip an original XMP1 module and connectors for 2 additional data sub modules. It combines the advantages of today’s successful XMP1 platform with its compact design. This guarantees a seamless integration in existing XMP1 networks as well as any other applications. The end-to-end management platforms ServiceOn XMP1 (SOX) and ServiceOn Access (SOA) fully supports the setup, configuration and monitoring of the XMP1 networks. Local management is supported by LCT.
Read more...
FXS Voice Tributary Card
ERM-MUX/Plus-FXS Voice Tributary Card
The ERM-Mux/plus FXS Voice Tributary Card provides six independent Foreign Exchange Station Voice channel capability. These 6 channel tributary cards are designed for voice applications over E1. Typically, an FXS connects to a standard telephone set. The FXS needs to sense on-hook, off-hook or disconnected status. It also must be able to provide ring function to a telephone set and it must pass caller-ID information. In the ERM-Mux/plus point-to-point application, the FXS can connect to a remote FXO (Foreign Exchange Office) when deployed as an extension from PBX (Private Branch Exchange) or PSTN (Public Switched Telephone Network). It may also connect to a remote FXS, also for extension from PBX or as a direct 'hotline' voice connection. Individual Shielded RJ-45 connectors provide the voice connections. When using this card, an appropriate voice compatible power module must be used in the ERM-Mux/plus.
Read more...
FXO Voice Tributary Card
ERM-MUX/Plus-FXO Voice Tributary Card
The ERM-Mux/plus FXO Voice Tributary Card provides six independent Foreign Exchange Office Voice channel capability. Each channel can independently assign any 64Kbps timeslot from the aggregate E1. Individual Shielded RJ-45 connectors provide the voice connections. Standard UTP or alternately shielded UTP are both acceptable cabling media. These voice channels may be linked to PBX (Private Branch Exchange) or PSTN (Public Switched Telephone Network) to facilitate voice to voice connections. When using this card, an appropriate voice compatible power module must be used in the ERM-Mux/plus.
Read more...
E&M Voice Tributary Card
ERM-MUX/Plus-E&M Voice Tributary Card
The ERM-Mux/plus E&M Voice Tributary Card provides six independent Ear & Mouth Voice channel capability. Each channel can independently assign any 64Kbps timeslot from the aggregate E1. Individual Shielded RJ-45 connectors provide the voice connections. Standard UTP or alternately shielded UTP are both acceptable cabling media. These voice channels may be linked to PBX (Private Branch Exchange) to facilitate voice to voice connections. The channels support selection of Type 1~5, support 2 or 4 wire operation and have 0.5dB steps for signal attenuation. When using this card, an appropriate voice compatible power module must be used in the ERM-MUX/Plus.
Read more...
G.703 64K Co-directional Tributary Card
ERM-MUX/Plus-G64KG703 64K Co-directional Tributary Card
The ERM-Mux/plus G64K Tributary Card provides six independent G.703 64Kbps Co-directional data channel capability. Each channel can independently assign any 64Kbps timeslot from the aggregate E1. Individual Shielded RJ-45 connectors that conform to USOC RJ-48C standard wiring provide the G.703 connections. Standard UTP or alternately shielded UTP are both acceptable cabling media. These data channels may be linked to multiplexers, terminal equipment or satellite/micro-wave transmission equipment. In Co-directional signaling, the clock signals are recovered from the received G.703 data stream. Only Tx and Rx pairs or a total of 4 wires are required in 64Kbps co-directional transmission.
Read more...
RS232 Sync/Async Tributary Card
ERM-MUX/Plus-RS232 Sync/Async Tributary Card
The ERM-Mux/plus Sync/Async RS232 Serial Tributary Card provides six independent RS-232 data channel capability. Incorporating six separate channels, each channel can independently assign any Nx64 timeslots from the aggregate E1. The single DB62 connector mates to a 1 to 6 cable that terminates to DB25 female connectors. These serial data channels may be linked to leased line modems for further extension or connected to other data terminal or data acquisition devices. When configured for synchronous use, the data connectors carry both clock and data. For asynchronous use, the clock signals can be ignored.
Read more...
Asynchronous RS-485/442 Serial Tributary Card
ERM-MUX/Plus-RS485 Asynchronous Serial Tributary Card
The ERM-Mux/plus Asynchronous RS485/422 Serial Tributary Card provides six independent RS-485/ RS-422 data channel capability. Incorporating six separate channels, each channel can independently assign any Nx64 timeslots from the aggregate E1. Each channel uses a pluggable 4-pin terminal block for connection one or two twisted pair wires. No cables are provided with this card. When connecting to RS-485, the channel supports 4-wire Full Duplex or 2-wire Half Duplex RS-485 transmissions for serial control or data acquisition.
Read more...
Nx64 Synchronous Serial Tributary Card
ERM-MUX/Plus-Data Nx64 Synchronous Serial Tributary Card
The ERM-Mux/plus Nx64 Serial Tributary Card provides V.35/ X.21/ RS-530/ RS-449 Synchronous data capability. Incorporating four separate channels, each channel can independently assign any Nx64 timeslots from the aggregate E1. The single HD68 connector mates to a 1 to 4 cable that terminates to the required connector type. Four different cables provide connection to V.35's MB34, X.21's DB15, RS-530's DB25 or RS-449's DB37 female connectors. Please be sure to select the right cable for your application when ordering this card.
Read more...
Fast Ethernet Bridge Tributary Card
ERM-MUX/Plus-ET100 Fast Ethernet Bridge Tributary Card
The ERM-Mux/plus Ethernet Bridge Tributary Card provides Ethernet over E1 capability. Incorporating two separate channels, this transparent bridge supports industry standard HDLC encapsulation. The WAN data rate depends on the number of E1 timeslots assigned (Nx64). The front panel has two RJ-45 shielded connectors for connection of 10Base-T or 100Base-TX Ethernet and status LEDs for each channel to display link state, speed, duplex and activity. Rounding out each bridge channel are support for 256 MAC filter address learning table and 340 packets buffer to aid in handling LAN side burst traffic.
Read more...
G.703 E1 Aggregate Card
ERM-MUX/Plus-E1 G.703 E1 Aggregate Card
The ERM-Mux/plus has two dedicated slots for installing E1 aggregate cards. Currently E1 cards are available with 2, 4 or 8E1 ports. In the backplane design of the ERM-Mux/plus, a maximum of 4 E1s can carry data to and from tributary (I/O) cards. One typical application could be to install two 4E1 cards in the chassis and have the cards act as one master and one hot-standby card for E1 redundancy. For other applications, an 8E1 card could be used to cross connect E1 timelots prior to assignment to the four available backplane channels. Another application can use the 'extra' E1 aggregate channels for drop & insert (Sub-E1) rather than performing cross connection. It can quickly be seen that a large number of applications are possible with the ERM-Mux/plus's flexible design.
Read more...
|
|
|
Page 1 of 2 |
