Ethernet G.703 E1 Bridge

CT-EOE1A

Uses HDLC encapsulation to transport Ethernet packets across the WAN.
Supports 10/100 auto-negotiation or manual settings for 10M, 100M, Full or Half Duplex Ethernet.
Easy to configure by a menu driven serial console interface.
Supports standard auto-MDIX feature that will completely eliminate Ethernet cross-over cables.
SNMP and proprietary MIB add the ability to manage the Eoe1A centrally through network management software.

Item	Description
Framing	Unframed
Line code	AMI/ HDB3
Bit rate	2.048Mbps (clear channel)
Relative receive level	0 to -43dB
Transmit level	Pulse Nominal 2.37V ±10% for 75ohm Amplitude Nominal 3.00V ±10% for 120ohm Zero amplitude ±0.1V
Jitter performance	According to ITU-T G.823
Connector	BNC(unbalanced), RJ-48(balanced)
Test Switches	Digital local loopback, Analog local loopback, Digital local and remote loopback, 2047 Test pattern
Connector	RJ-45
Data Rate	10/100Mbps; Half Duplex / 20/ 200Mbps; Full duplex
Filtering & Forwarding	90,000 packets/sec
Delay	1 frame
Frame Buffer	340 frames
MAC Table	256 MAC address
Protocols	Synchronous HDLC
Indications	LEDs (Power, Signal Loss, Alarm, Link, TD, RD, 100, Full, Error, Error, Test)
Standards	ITU-T G.703, G.706 and G.732, IEEE 802.3/802.3u
Management	Console, Web, SNMP
Power Input	AC: 90-250VAC ; DC: 18-72 VCD
Power Consumption	20W

Order Code	Description
CT-EOE1A/AC	1U half 19" Ethernet over unframed E1 SNMP with AC power (100 ~ 240 V )
CT-EOE1A/DC	1U half 19" Ethernet over unframed E1 SNMP with DC power( 18 ~ 75 V )
CT-EOE1A /AD	1U half 19" Ethernet over unframed E1SNMP with AC (100~240V) and DC ( 18 ~ 75 V)

Product Category