Ethernet to WAN (V.35/RS530/449/232/ X.21) Bridge

CT-ET100A

High performance remote, self-learning, Ethernet bridge.
Compact size and low cost makes it ideal for cost-sensitive bridging applications, or as a LAN extender or segmenter over bit stream type infrastructures.
Built-in n x 64 (56)Kbps timing clock generator makes it easy to connect to other n x 64 (56)Kbps related data equipment.
Several options of data interfaces, including V.35, RS-530, RS-449, RS-232, and X.21 make this unit's connection between 10Base-T or 100Base-TX LAN and various data port interfaces convenient.

Item	Description
WAN	Interface: Selectable RS-232(Sync), V.35, RS-530, RS-449, RS-232, X.21with Adapter Cable Protocol: Synchronous PPP, HDLC (ISO 13239), CISCO® HDLC Connector: DB25M Type: DTE Configuration: All Configuration by Dip switch (Protocol, interface, Clock mode, data rate) Data rate: Nx56Kbps, Nx64Kbps RS-232 up to 128Kbps V.35, X21, RS-530, RS-449 up to 10Mbps Clock source: Tx/Rx internal or external Handshake (DCD) Follow CTS/RTS or Always On
Indications	LEDs (PWR, WAN Rx/Tx, LAN Tx/Rx/Link/Err/Speed)
LAN	Compliant with IEEE 802.3, 802.3u, 802.3x Connector: RJ-45 Speeds: 10/100Base-TX, Full/Half duplex Frames: Support 64 ~ 2044 byte packet lengths
Bridge Specifications	MAC Address learning, aging and deletion after 5 minutes 256 addresses MAC table, 1763 packet buffer
Power	12VDC
Power Consumption	< 5 W
Dimensions	135 x 79 x 25mm (D x W x H)
Weight	180g
Temperature	0°C ~ 50°C (Operating), -10°C ~ 70°C (Storage)
Humidity	10 ~ 90% non-condensing
Certification	CE, FCC

Order Code	Description
CT-ET100A/V35M	Ethernet to V35 WAN Bridge with V.35 cable: DB25F to MB34M, 1 m
CT-ET100A/X21M	Ethernet to X21 WAN Bridge with X21 cable: DB25F to DB15M, 1 m
CT-ET100A/RS530M	Ethernet to RS530 WAN Bridge with RS530 cable: DB25F to DB25M , 1 m
CT-ET100A/RS449M	Ethernet to RS449 WAN Bridge with RS449 cable: DB25F to DB37M , 1 m
CT-ET100A/RS232M	Ethernet to RS232 WAN Bridge with RS232 cable: DB25F to DB25M , 1 m

Product Category