1U 19" 4 slot rack mountable E1 multiplexer

CT-ETU02-MUX

E1 Multiplexer with 4 configurable X.21/RS-530/449 data ports.

Four DTE devices may be linked at data rates of 64Kbps to 2048Kbps.
Optional SNMP Network Management System
Easy to configure
In-service diagnostics and network status monitoring
Meets all of the E1 specifications including ITU-T G.703, G.704, G.706, G.732, and G.823.

Overview

The ETU02-MUX is a 1U 19(23)" 4 slot rack mountable multiplexing solution for Fractional E1 network services. Up to four DTE devices may be linked to this model at data rates of 64Kbps to 2048Kbps. There is also provision for one optional E1 sub-link which will perform drop & insert with user-defined timeslot connections from a PABX or other E1 equipment to E1 network services. The Fractional E1 2 or 4 port multiplexer supports local control and diagnostics via an LCD display and LED status indicators located on the front panel or via a serial console port.These features enable users to easily configure the unit, execute the in-service diagnostics and monitor the network status. The ETU02-MUX provides for optional SNMP Network Management System, which allow the user to remotely control and manage the system via SNMP protocol. This model fully meets all of the E1 specifications including ITU-T G.703, G.704, G.706, G.732, and G.823

Specifications

Item	Description
E1 and Sub-E1	Framing: Unframed / Framed CCS(PCM31) Framed: CAS(PCM30) Bit rate: 2.048Mbps±0 ppm Line code: AMI / HDB3 Line impedance: 75 ohm (BNC) / 120 ohm (DB-15, RJ-45)
Transmitter level	Relative receive level: 0 to -43dB Pulse: Nominal 2.37V ±10% for 75ohm Amplitude: Nominal 3.00V ±10% for 120ohm Zero amplitude: ±0.1V Transmit frequency: Internal timing±100 ppm Tracking: Recovery timing±100 ppm External timing: ±100 ppm Jitter performance: According to ITU-T G.823 Return loss: 12dB for 51 ~ 102KHz 18dB for 102 ~ 2048KHz, 14dB for 2048 ~ 3072KHz Interface connector: 15-pin D-type F, BNC
User Data Channel	Data rate: Nx56Kbps or Nx64Kbps Control signals: CTS constantly on DSR constantly on, except during test loops DCD constantly on or follows RTS, except during signal loss Loopback: Line, Payload, local, DTE loopback User Data Channel BERT Test Patterns: 511, 2047, 2e15-1, 2e20-1, QRSS, 2e23-1, All 1, All 0, Alt, 0011, 3 in 24, 1 in 16, 1 in 8,1 in 4 test pattern.
Key Pad	4 operation keys
LCD	16 x 2 character backlit LCD
Indications	Signal loss, Sync loss, Alarm (AIS, MRAI, RAI), TD, RD, Error, Test
Standard	ITU-T G.703/G.704/G.706, G.732 & G823
Power Input	AC: 90 ~250V, DC24: -18 ~-36VDC, DC48: -36 ~-72VDC
Power / Consumption	10W
Dimensions / Weight	235 x 438 x 45mm (D x W x H) / 2.9kg
Temperature	0~50°C (Operating), -10~70°C (Storage)
Humidity	10~90% non-condensing
Certification	CE, FCC
MTBF	57,000 hrs

Ordering Information

Order Code	Description
CT-ETU02-MUX4-AC	4 data ports AC power
CT-ETU02-MUX4-DC	4 data ports DC power
CT-ETU02-MUX4-AD	4 data ports AC+DC power
CT-ETU02-MUX2-AC	2 data ports AC power

More Information

You might also be interested in...

FT-1240CNS

Air Traffic Management - CNS Transport System

CT-FRM220-FXO/FXS/SFP

Single port FXO/FXS telephone fibre converter, singlemode, multimode or CWDM

CT-IPM-8E1/IPM-16E1

16 Channel E1 over Ethernet (TDM over IP)

CT-ETU011

Single modular stand alone port for E1 DSU/CSU

Product Category

SDH/PDH Multiplexers

Voice and Data Multiplexers