1000Base-T to 1000Base-X SFP Media Converter

CT-FRM220-1000TS

Transparent low latency Gigabit Ethernet SFP converter

Managed (when installed in FRM220 with NMC) or non-managed
Completely transparent to Ethernet packets
Supports jumbo packets (>9K bytes).
LED indicators for power, UTP port speed, Link, and duplex status, FX port Link and duplex status.
Auto Laser Shutdown (ALS)

Overview

The FRM220-1000TS is a transparent Gigabit Ethernet 1000Base-T to 1000Base-SX/LX SFP converter with very low latency. They are managed (when installed in FRM220 with NMC) or non-managed stand-alone media converters, which give you the options to choose from a wide range of industry standard SFP modules with LC connectors.

SFPs in multi-mode and single mode types are available as well as BiDi which allows bi-directional transmissions using only a single fibre cable. Because they are completely transparent to Ethernet packets, they are able to support any size frames, including undersized or jumbo packets (>9K bytes). LED indicators signal the power status of the converter, UTP port speed, Link, and duplex status, FX port Link and duplex status.

Specifications

Item	Description
Optical Interface	Connector SFP LC Data rate 1000Mbps Duplex mode Full duplex Fibre MM 50/125μm, 62.5/125μm SM 9/125μm Distance MM 550m, 2km, SM15/30/50/80/120km WDM 20/40/60km Wavelength MM 1310nm, SM 1310,1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B)
Electrical Interface	Connector RJ45 Data rate 1000Mbps Duplex mode Full duplex Cable 10Base-T Cat.3, 4, 5, UTP
Standard	IEEE 802.3ab
Indications	LED (Power, FX-Link, FX Duplex, TX-SPD, TX-Duplex, TX-Link)
Power Input	Card : 12VDC Standalone : AC, DC options
Power Consumption	< 12W
Dimensions	Card: 155 x 20.8 x 88mm (D x W x H)
Weight	120g
Temperature	0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity	10 ~ 90% non-condensing
Certification	CE, FCC, LVD
MTBF	65,000 hrs (25°C)