10/100BaseTx to 100BaseFx OAM/IP managed FE converter

CT-FRM220-100AS-1

OAM compliant copper to fibre Fast Ethernet.
Converts between 10/100Base-TX and 100Base-FX with SFP.
Controlled and monitored from a centrally located managed rack.
Supports bandwidth control, duplex and speed configuration, VLAN tagging, Q-in-Q, QoS, Spanning tree as well as auto laser shutdown, link fault pass through, OAM loop back and dying gasp.

Item	Description
Optical Interface	Connector SFP LC Data rate 100Mbps Duplex mode Full duplex Fibre MM 50/125μm, 62.5/125μm. SM 9/125μm Distance MM 550m, 2km, SM15/30/50/80/120km WDM 20/40/60km Wavelength MM 1310nm, SM 1310, 1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B)
Power Consumption	< 12W
Dimensions	Card: 155 x 20.8 x 88mm (D x W x H)
Weight	120g
Electrical Interface	Connector RJ45 Data rate 10Mbps, 100Mbps Duplex mode Half / Full duplex
Electrical Interface	Cable: 10Base-T Cat.3, 4, 5, UTP 100Base-TX Cat.5, 5e or higher
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, ITU-T G.664
Indications	LED : Power, FX-Link, FEF, TEST, Speed(10,100), FULL
Power Input	Card : 12VDC Standalone : AC, DC options
Temperature	Storage conditions Temperature range : -5~+45°C Relative Humidity : 5~95% Rh Absolute Humidity : 1~25g H2O/m3 Operation conditions Temperature range : -5~+45°C Relative Humidity : 5~95% Rh Exist conditions for condensation and icing Absolute Humidity : 1~29g H2O/m3
Certification	CE, FCC, EN60950 LVD compliant
MTBF	65,000 hrs