4 Port In-Band OAM/IP managed switch

CT-FRM220-10/100AS-2

Two copper and two fibre Fast Ethernet ports.
Converts between 10/100Base-TX and 100Base-FX with SFP.
Can also be completely controlled and monitored from a centrally located managed rack.
Stand-alone IP Based, Web GUI, Telnet, SNMP management.
Supports OAM remote loopback to assist in diagnosing network problems.

Overview

FRM220-10/100AS-2 is an IEEE 802.3ah OAM compliant two copper to two fibre Fast Ethernet solution designed to make conversion between 10/100Base-TX and 100Base-FX with SFP. With stand-alone SNMP and Web-based management, the network administrator can monitor, configure and control the activity of each IEEE 802.3ah series card and remotely connected
OAM compliant converter. By offering IEEE 802.3ah OAM in-band management, this converter can also be completely controlled and monitored from a centrally located managed rack. Based on a powerful L2 switch architecture, this converter supports bandwidth control, duplex and speed configuration, VLAN tagging, Q-in-Q, QoS, Spanning tree as well as auto laser shutdown, link fault pass through, OAM loop back and dying gasp.

Data Sheet

LA-FRM220-10-100AS-2.pdf

Specifications

Item	Description
Optical Interface	Connector SFP LC Data rate 100Mbps Duplex mode Full duplex Fibre MM 50/125μm, 62.5/125μm. SM 9/125μm Distance MM 550M, 2km, SM15/30/50/80/120km WDM 20/40/60km Wavelength MM 1310nm, SM 1310, 1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B)
Power Consumption	< 12W
Dimensions	Card: 155 x 20.8 x 88mm (D x W x H)
Weight	120g
Electrical Interface	Connector RJ45 Data rate 10Mbps, 100Mbps Duplex mode Half / Full duplex
Electrical Interface	Cable: 10Base-T Cat.3, 4, 5, UTP 100Base-TX Cat.5, 5e or higher
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, ITU-T G.644
Indications	LED: Power, FX-Link, FEF, TEST, Speed(10, 100), Full
Power Input	Card : 12VDC Standalone : AC, DC options
Temperature	Storage conditions Temperature range : -5~+45°C Relative Humidity : 5~95% Rh Absolute Humidity : 1~25g H2O/m3 Operation conditions Temperature range : -5~+45°C Relative Humidity : 5~95% Rh Exist conditions for condensation and icing Absolute Humidity : 1~29g H2O/m3
Certification	CE, FCC, EN60950 LVD compliant
MTBF	65,000 hrs