25dB Gain 10dBm Output DWDM EDFA Preamp
CT-FRM220-OAP10
Image

- Single channel optical amplifier EDFA preamp module for DWDM applications
- Operates at the receive end of an optical link
- Designed for optical amplification to compensate for losses in a Demultiplexer located near the optical
receiver - Provides Automatic Gain Control (AGC)
- Management and monitoring via FRM220-NMC HTTP/SNMP management card
- Fast transient suppression feature ensures that the output power is kept at a constant level when there are fast changes in input power
- Up to 10 dBm output power
- Gain flattening filters (GFF) assures flat gain (<1dB variance) over the entire amplified C-band
- LC/UPC connectors
- Hot swappable
Technical
Spec Text | |
---|---|
Operating wavelength | 1528 ~ 1563nm |
Input power | -30 ~ -16dBm |
Signal gain | 15 ~ 25dB |
Total output power | +10dBm |
Total saturated output power | +10dBm |
Gain flatness (Max.) | ±0.75dB |
Noise figure | 6.0dB (Typ) |
Polarization dependent gain (Max.) | 0.5dB |
Polarization mode dispersion (Max.) | 0.5ps |
Output power stability (Max.) | ±0.1dB |
Return loss (Min.) | 45dB |
LOS De-assert | -31dBm |
LOS assert | -32dBm |
AGC gain (dB) | 15 ~ 25dB |
Connector | LC/UPC |
Control mode | AGC |
Operation case temperature | 0 ~ 65°C |
Relative humidity (noncondense) | 5 ~ 85% |
Laser Class | Class 1M |
Power consumption | 8.5W |
Ordering Information
Order Code | Description |
---|---|
CT-FRM220-OAP10 | DWDM C -band EDFA preamp card with automatic gain control (AGC) |
More Information
Product Category