Optical Protection Switch - Multimode

CT-FRM220-OPS51M

Multimode fibre path redundancy
Monitoring and management available through HTTP/SNMP - alongside FRM220-NMC
Programmable RX fail-over threshold
Latch feature, if power is lost the switch remains in its current state
Traffic is switched in one of two modes : non-revertive, manual
Standard LC connectors

Overview

The FRM220-OPS51M is a Multi-mode Fibre Optical Protection Switch that is able to provide Multi-mode fibre path redundancy on a channel by channel basis.This unit is particularly well suited forprotection in 50/125um Multi-mode 850nm type of fibre data transmission. This solution includes monitoring capabilities for the working fibre only. In case of a fibre cut in the active path, traffic will be switched over to the protected path in less than 50ms. Monitoring is available through SNMP Management when the card is placed in an FRM220 rack with SNMP management. The management can view the converter card's status, type, version, fibre link status and alarms. The card can be configured to enable or disable the port, reset the port, and configure receive threshold levels for path switching.

Specifications

Item	Description
Connecter LC / PC	LC / PC
LEDs	Power System, Working Path, Protection Path, Work mode
Power	DC 12V In
Operating Wavelength	850nm
Fibre Type	Multimode 50/125um
Switch Type	2x1 / Latching
Input Power (Optical)	-30~5dBm
Insertion Loss	≤ 3dB (Pair)
Return Loss	≥ 30dB (SM)
Cross-talk	≥ 30dB (SM)
Restoration Time	≤20ms
Power Consumption	< 3W
Dimensions	Card: 155 x 20.8 x 88mm (D x W x H)
Weight	130g
Temperature	0 ~ 50°C (Operating), -10 ~ 70°C (Storage)
Humidity	5%RH to 95%RH non-condensing
Certification	CE, FCC
MTBF	65,000 hours