24 GbE PoE+, 2 1GbE combo (SFP or RJ45) managed switch

CT-GSW-3224MP

24-Port fully managed PoE+ Gigabit switch with 2 Gigabit SFP Ports. Advanced Layer 2, and power management.

24 PoE ports supports IEEE 802.3at/af PoE up to 30W per port
2 SFP/RJ45 combo ports supports 100M and Gigabit Fibre transceiver for long distance transmission
Layer 2+ Full Managed Software Features with MSTP, LACP, LLDP, sFlow, 802.1X, TACACS+, and ACL
DHCP Server/Relay/Snooping
PD Alive Check
Automatically adjust Fan speed function

Overview

The GSW-3224MP is 24-port 10/100/1000M PoE + 2 Gigabit SFP/RJ45 Copper Combo Ports L2+ Full Managed Switch that is designed for small or medium network environments. The 24 PoE ports support IEEE 802.3at/af PoE technology up to 30W per port and maximum 100m transmission distance.

450W PoE+

The switch equipped with AC to DC power module to support 450W power budget for PoE power.The added 2 SFP/RJ45 combo ports support 100M and Gigabit Fiber transceiver for long distance transmission. The switch also supports Layer 2+ full management software features. These features are powerful to provide PoE Control, Network Control, Management, Monitor and Security features’requests. It is the best choice to boost your network with better performance, efficiency and high PoE power consumption.

Keep alive

When “PD alive check” function is enabled, the GSW-3224MP will check network PoE powered devices (for example, IP CAMs) periodically. If the switch doesn’t get any replies from the PoE powered device, GSW-3224MP will do a power cycle (PoE power OFF, and PoE power ON) to the port that connects the network PoE powered device, forcing it to reboot. You can set the frequency of detection, number of times of detection, and the time period to perform power cycle when there’s no reply via the switch’s PoE configuration web page.

Technical Notes

What is Power over Ethernet ?

Power over Ethernet, commonly abbreviated to PoE, is a technology that enables DC power to be delivered over the same twisted pair copper cabling as the data. This allows end devices such as IP phones, CCTV cameras and wireless access points to receive power across the network and avoids the need to install electrical cabling and a power source at the remote end.

Data Sheet

LA-GSW-3224MP.pdf

Specifications

Item	Description
Interface	10/100/1000 Base-T 24 100/1000Base-X SFP & 1000M RJ45 Combo Port 2 Console Port for CLI Management 1
System Performance	Packet buffer 4M bits MAC Table size 8K Switching Fabric Capacity 52Gbps Forwarding Rate 38.688Mbps
PoE Features	IEEE 802.3 af/at IEEE 802.3af & IEEE 802.3at Number of PoE Ports 24 Max. Power Budget 450Watts Max. System Power Consumption 70Watts Max. Total Power Consumption 520Watts External/Internal Power Internal Power Power Feeding Detecting Capabillity on PD PD Alive Check PD Classification Power Management (Per Port) Enable/Disable PoE Per Port. Priority Setting Per Port.Power Level Setting Per Port. Overloading Protection
L2 Features	Auto-Negotiation Auto MDI/MDIX Flow Control (Duplex) 802.3x (Full) Back-Pressure (Half)
Spanning Tree	IEEE 802.1D (STP) IEEE 802.1W (RSTP) IEEE 802.1S (MSTP)
VLAN	VLAN Group : 4K Tagged Based Port Based Voice VLAN : Voice VLAN with OUI
Link Aggregation	IEEE 802.3ad with LACP Static Trunk MAX. LACP Link Aggregation Group: 13 Max. Port Per Link Aggregation Group: 8
IGMP Snooping	IGMP Snooping v1/v2/v3 : Supports 1024 IGMP groups IGMP Static Multicast Addresses : Supports 1024 Static Multicast addresses IPv6 MLD Snooping : Supports 1024 NLD group MLD Static Multicast Addresses : Supports 1024 Static Multicast addresses Querier Immediate Leave
Jumbo Frame Support	9.6KB
Qos Features	8 queues/port Rate Limiting Ingress : 1Kbps/1pps Egress : 1Kbps/1pps Diffserv (RFC2474 Remarking) Scheduling (WRR, Strict, Hybrid) CoS IEEE 802.1p IP Tos Precendence, IP DSCP