16x 10/100BaseT + 8x SFP with 8/16x PoE

CT- IFS-1608GSM-16PH/8PH

Image
  • Managed, industrial grade, L2 PoE (Power over Ethernet)
  • Rugged DIN rail or wall mountable IP-30 enclosure
  • Cable diagnostics, identifies opens/shorts distance
  • μ-Ring for redundant cabling, recovery time<10ms in 250 devices
  • IEEE 1588 PTP V2 for precise time synchronization
  • SmartConfig mass Configuration Tool
  • SmartView Centralized Management Tool

Overview

These models are managed, industrial    grade, L2 PoE (Power over Ethernet) switches that    provide16x 10/100Base-TX ports plus 8x 100/1000Base-X SFP ports with 16/8x PoEPorts. The PoE features enable power and data to be transferred via a single cable, thereby considerably reducing cabling and electrical wiring expenses. Housed in rugged DIN rail or wall mountable IP-30 enclosures, these switches are the perfect choice for harsh environments, such as industrial networks, intelligent transportation systems (ITS) and are also suitable for many military and utility applications where environmental conditions exceed commercial product specifications. 

Image
Din rail gigabit switch with 1588

These switches can also operate either at standard operating temperature range (-10 to 60°C) or at wide operating temperature range (-40 to 75°C) to fulfill the special needs of industrial automation applications.

 

 

Technical Notes

What is Power over Ethernet ?

Power over Ethernet, commonly abbreviated to PoE, is a technology that enables DC power to be delivered over the same twisted pair copper cabling as the data. This allows end devices such as IP phones, CCTV cameras and wireless access points to receive power across the network and avoids the need to install electrical cabling and a power source at the remote end.

Specifications

Item Description
Standard

IEEE 802.3 10Base-T 10Mbit/s Ethernet
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
IEEE 802.3af PoE (Power over Ethernet)
IEEE 802.3at PoE+ (Power over Ethernet enhancements)
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITΜ-T G.8032 /Y.1344 ERPS (Ethernet Ring Protection Switching)
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1X Port based and MAC based Network Access Control, Authentication
IEEE 802.3ac Max frame size extended to 1522Bytes
IEEE 802.3ad Link aggregation for parallel links with LACP(Link Aggregation Control Protocol)
IEEE 802.3x Flow control for Full Duplex
IEEE 802.1ad Stacked VLANs, Q-in-Q
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
IEEE 802.3az EEE (Energy Efficient Ethernet)

Switch Architecture

Back-plane (Switching Fabric): 19.2Gbps
Full wire-speed

Network Connector

16x 10/100Base-TX RJ-45 + 8x 100/1000Base-X SFP connector
RJ-45 UTP port supports Auto negotiation speed, Auto MDI/MDI-X function,
SFP port supports 100/1000M dual speed with DDMI

Console

RS-232 (RJ-45)

PoE standard & RJ-45 Pin Assignment

IFS-1608GSM-16PH : 16x IEEE 802.3af /IEEE 802.3at PoE+
IFS-1608GSM-8PH : 8x IEEE 802.3af /IEEE 802.3at PoE+
2 pairs PoE, PoE+, 30W/port

End-Span, Alternative A mode.
Positive (V+) : RJ-45 pin 1, 2.
Negative (V-) : RJ-45 pin 3, 6.

Network Cable

UTP/STP above Cat. 5e cable
EIA/TIA-568 100-ohm (100m)

Power Supply

Redundant Dual DC 48V (44~57VDC) input power, (Removable terminal block )
(50~57V input is recommended for IEEE 802.3at PoE+)

Jumbo Frame

9.6KB

MAC Address Table

8K

Removable Terminal Block

Provide 2 redundant power, alarm relay contact, 6 Pin

Environment

Operating Temperature -10 ~ 60°C (IFS-1608GSM-16PH & IFS-1608GSM-8PH) -40 ~ 75°C (IFS-1608GSM-16PHE & IFS-1608GSM-8PHE)
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40 ~ 85°C

Housing

Rugged Metal, IP30 Protection, Fanless

Dimensions

135.6x 99x 160mm (Dx Wx H) (IFS-1608GSM-16PH)
116 x 92 x 160mm (Dx Wx H) (IFS-1608GSM-8PH)

Weight

1.95kg (IFS-1608GSM-16PH)
1.375kg (IFS-1608GSM-8PH)

Installation Mounting

DIN Rail mounting, or wall mounting (Optional)

MTBF

436,353 Hours (IFS-1608GSM-16PH)
439,881 Hours (IFS-1608GSM-8PH)
(MIL-HDBK-217)

Warranty

5 years

Certification

EMC CE (EN55024, EN55032)
EMI (Electromagnetic Interference) FCC Part 15 Subpart B Class A, CE
Railway Traffic EN50121-4
Immunity for Heavy Industrial Environment EN61000-6-2
Emission for Heavy Industrial Environment EN61000-6-4
EMS (Electromagnetic Susceptibility) Protection Level EN61000-4-2 (ESD) Level 3, Criteria B, EN61000-4-3 (RS) Level 3, Criteria A, EN61000-4-4 (Burst) Level 3, Criteria A, EN61000-4-5 (Surge) Level 3, Criteria B
EMS (Electromagnetic Susceptibility) Protection Level EN61000-4-6 (CS) Level 3, Criteria A, EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
Safety EN62368-1 (IFS-1608GSM-16PH) UL60950-1, EN60950-1 (IFS-1608GSM-8PH)
Surge protection 4KV for PoE, UTP and Fibre ports
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6

Ordering Information

Order Code Description
CT-IFS-1608GSM-16PH 16x 10/100Base RJ45 + 8x 100/1000Base SFP with 16x PoE 400W, 48VDC -10~60°C
CT-IFS-1608GSM-16PHE 16x 10/100Base RJ45 + 8x 100/1000Base SFP with 16x PoE 400W, 48VDC -40~75°C
CT-IFS-1608GSM-8PH 16x 10/100Base RJ45 + 8x 100/1000Base SFP with 8x PoE 240W, 48VDC -10~60°C
CT-IFS-1608GSM-8PHE 16x 10/100Base RJ45 + 8x 100/1000Base SFP with 8x PoE 240W, 48VDC -40~75°C

More Information