4 port 100BaseTx, 1 100BaseFx (ST/SC), IP30

CT-IFS-401F

IFS-401 din rail 100M switch with fibre port

Stable and reliable Ethernet transmission
Rugged DIN rail or wall mountable enclosures
Designed for harsh environments
Wide operating temperature -40 ~ 75°C (-E model )
Broadcast storm protection (IFS-401F, IFS-402F)
DIP-Switch to set functions
Power failure alarm

Overview

These models are unmanaged industrial grade switches with 4 10/100Base-TX ports and 1x fibre port, that provide stable and reliable Ethernet transmission. Housed in rugged DIN rail or wall mountable enclosures, these switches are designed for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications (See Figure 1, 2). Standard operating temperature range models(-10 to 60°C) and wide operating temperature range models(-40 to 75°C) fulfill the special needsof industrial automation applications.

Alarm Relay

The alarm relay contact can be wired into an alarm circuit which senses an alarm condition when the contact is broken. The alarm relay is normally closed when there is no alarm condition. The alarm conditions are user settable via dip switch. The alarm relay contact supports 1A current at 24VDC.

DC Power

A removable terminal block on the top panel provides both power and alarm connections. Power can be provided through the dual inputs from separate sources (PWR1 & PWR2). One power supply is enough to power up the device. If two power supplies are used, the device provides power redundancy function. See the figure below for recommended DC power wiring scheme.

Data Sheet

LA-IFS-401F-402F-800-802GS-1602GS.pdf

Specifications

Item	Description
IEEE Standard	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
Switch Architecture	Back-plane (Switching Fabric) :1.0Gbps Full wire-speed
Transfer Rate	14,880pps for Ethernet port 148,800pps for Fast Ethernet port 1,488,000pps for Giga Ethernet port
MAC Address Table	2K
Packet Buffer Size	448Kbit
Network Connector	4x RJ-45, 1x Fibre RJ-45 Port: Auto MDI/MDI-X function, 10/100Base-TX auto negotiation speed, Full/Half duplex 1 x 100Base-FX SC/ST fibre port, Multi/Single Mode
Network Cable	10Base-T: 2-pair UTP/STP Cat. 5e cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5e cable EIA/TIA-568 100-ohm (100m) Fibre Cable (Multi-mode): 50/125um~62.5/125um Network Cable Fibre Cable (Single-mode): 8/125um~10/125um Wavelength: 1310nm (Multi-mode/Single-mode) Available distance: 2KM (Multi-Mode) 30KM (Single-Mode) 50KM (Single Mode )
Power Supply	Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block )
Power Consumption	4.4W
Environment	Operating Temperature -10 ~ 60°C Operating Humidity 5% to 95% (Non-condensing) Storage Temperature -40 ~ 85°C
Housing	Rugged Metal, IP30 Protection and Fanless
Dimensions	106 x 31.6 x 142mm (D x W x H)
Weight	0.37kg
Installation Mounting	DIN Rail mounting, or wall mounting (Optional)
MTBF	908,971 Hours (MIL-HDBK-217)
Warranty	5 years
Certification	EMC/EMS CE EMI (Electromagnetic Interference) FCC Part 15 Subpart B Class A, CE Railway Traffic EN50121-4 Immunity for Heavy Industrial Environment EN61000-6-2 Emission for Heavy Industrial Environment EN61000-6-4 EMS (Electromagnetic Susceptibility) Protection Level EN61000-4-2 (ESD) Level 3, Criteria B, EN61000-4-3 (RS) Level 3, Criteria A, EN61000-4-4 (Burst) Level 3, Criteria A, EN61000-4-5 (Surge) Level 3, Criteria B, EN61000-4-6 (CS) Level 3, Criteria A, EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A Safety UL60950-1 (Pending) Hi-pot isolation protection DC 2.25KV for power to chassis ground, and UTP port to chassis ground (IFS-1602GS) 4KV surge protection Supported for UTP Port (IFS-1602GS) Shock IEC 60068-2-27 Freefall IEC 60068-2-32 Vibration IEC 60068-2-6

Ordering Information

Order Code	Description
CT-IFS-401F-SC002	4x 10/100Base RJ15 +1x 100Base Fibre SC connector 2km -10~60°C
CT-IFS-401F-ST002	4x 10/100Base RJ15 +1x 100Base Fibre ST connector 2km -10~60°C
CT-IFS-401F-SC030	4x 10/100Base RJ15 +1x 100Base Fibre SC connector 30km -10~60°C
CT-IFS-401F-ST030	4x 10/100Base RJ15 +1x 100Base Fibre ST connector 30km -10~60°C
CT-IFS-401F-SC050	4x 10/100Base RJ15 +1x 100Base Fibre SC connector 50km -10~60°C
CT-IFS-401F-ST050	4x 10/100Base RJ15 +1x 100Base Fibre ST connector 50km -10~60°C
CT-IFS-401F-SC020A	4x 10/100Base RJ15 +1x 100Base Fibre SC connector WDM Bidi 20km TX:1310nm -10~60°C
CT-IFS-401F-ST020A	4x 10/100Base RJ15 +1x 100Base Fibre ST connector WDM Bidi 20km TX:1310nm -10~60°C
CT-IFS-401F-SC020B	4x 10/100Base RJ15 +1x 100Base Fibre SC connector WDM Bidi 20km TX: 1550nm -10~60°C
CT-IFS-401F-ST020B	4x 10/100Base RJ15 +1x 100Base Fibre ST connector WDM Bidi 20km TX: 1550nm -10~60°C
CT-IFS-401F-E-SC002	4x 10/100Base RJ15 +1x 100Base Fibre SC connector 2km -40~75°C
CT-IFS-401F-E-ST002	4x 10/100Base RJ15 +1x 100Base Fibre ST connector 2km -40~75°C
CT-IFS-401F-E-SC030	4x 10/100Base RJ15 +1x 100Base Fibre SC connector 30km -40~75°C
CT-IFS-401F-E-ST030	4x 10/100Base RJ15 +1x 100Base Fibre ST connector 30km -40~75°C
CT-IFS-401F-E-SC050	4x 10/100Base RJ15 +1x 100Base Fibre SC connector 50km-40~75°C
CT-IFS-401F-E-ST050	4x 10/100Base RJ15 +1x 100Base Fibre ST connector 50km -40~75°C
CT-IFS-401F-E-SC020A	4x 10/100Base RJ15 +1x 100Base Fibre SC connector WDM Bidi 20km TX:1310nm -40~75°C
CT-IFS-401F-E-ST020A	4x 10/100Base RJ15 +1x 100Base Fibre ST connector WDM Bidi 20km TX:1310nm -40~75°C
CT-IFS-401F-E-SC020B	4x 10/100Base RJ15 +1x 100Base Fibre SC connector WDM Bidi 20km TX: 1550nm -40~75°C
CT-IFS-401F-E-ST020B	4x 10/100Base RJ15 +1x 100Base Fibre ST connector WDM Bidi 20km TX: 1550nm -40~75°C