4, 8 and 16 port 100BaseTx Ethernet switch with Gigabit SFP slots

CT-IFS-402/803/1604GSM

Image
  • Managed industrial grade L2+ switches with 16/8/4 10/100Base-TX ports and 4/3/2 GbE/100M SFP ports
  • DIN rail or wall mountable enclosures
  • Standard and wide operating temperature range models
  • Supports ring topology recovery time<10ms in 250 devices
  • Supports IEEE 1588 PTP V2 for precise time synchronization
  • Provides SmartConfig for quick and easy mass Configuration
  • Supports SmartView for Centralized Management

Overview

These models are managed industrial grade L2+ switches with 16/8/4 10/100Base-TX ports and 4/3/2 GbE/100M SFP ports that provide stable and reliable Ethernet transmission. Housed in rugged DIN rail or wall mountable enclosures, these switches are designed for harsh environments, such as industrial networking, security automation applications, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications (See Figure 1). Standard operating temperature range models (-10 to 60°C) and wide operating temperature range models (-40 to 75°C) fulfill the special needs of industrial automation applications.

Security

The units are equipped with both RADIUS and TACACS+ authentication for use in sensitive networks where security is paramount. SSL & SSH2 are also supported.

Image
Ethernet Ring example

IEEE802.3az Energy Efficient Ethernet

Management features provide for the optimisation of power consumption.   Cable lengths are automatically determined and the power for ports with shorter cables is reduced. Ports with inactive connections go into standby mode.  

1588 Precision Time Protocol

These switches  support IEEE 1588 PTP V2 for precise time synchronization.  Each port may be configured independently  to operate in Ordinary-Boundary,  Peer to Peer Transparent Clock,  End to End Transparent Clock, Master, or Slave mode.  Accuracy is measured in nanoseconds, making it suitable for time sensitive applications such as mobile phone networks, military systems and large scale financial networks.

Specifications

Item Description
Standard

IEEE 802.3 10Base-T 10Mbit/s Ethernet Console RS-232 (RJ-45)
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 /Y.1344 ERPS (Ethernet Ring Protection Switching)
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1X Port based and MAC based Network Access Control, Authentication
IEEE 802.3ac Max frame size extended to 1522Bytes.
IEEE 802.3ad Link aggregation for parallel links with LACP(Link Aggregation Control Protocol)
IEEE 802.3x Flow control for Full Duplex
IEEE 802.1ad Stacked VLANs, Q-in-Q
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritisation
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
IEEE 802.3az EEE (Energy Efficient Ethernet)

VLAN ID

4094 IEEE 802.1Q VLAN VID

Switch Architecture

Back-plane (Switching Fabric): 4.8Gbps (IFS-402GSM), 7.6Gbps (IFS-803GSM) 11.2Gbps (IFS-1604GSM)
Full wire-speed

Network Connector

4x 10/100Base-TX RJ-45 + 2x 100/1000Base-X SFP Slot (IFS-402GSM)
8x 10/100Base-TX RJ-45 and 3x 100/1000Base-X SFP Slot (IFS-803GSM)
16x 10/100Base-TX RJ-45 and 4x 100/1000Base-X SFP Slot (IFS-1604GSM)
RJ-45 UTP port support Auto negotiation speed, Auto MDI/MDI-X function, SFP port support 100/1000M dual speed with DDMI

Console

RS-232 (RJ-45)

Network Cable

UTP/STP above Cat. 5e cable
EIA/TIA-568 100-ohm (100m)

Jumbo Frame

9.6KB

IEEE 802.3ac

Max frame size extended to 1522Bytes (allow Q-tag in packet)

MAC Address Table

8K

Memory Buffer

512K Bytes for packet buffer

Removable Terminal Block

Provide 2 redundant power, alarm relay contact, 6 Pin

Environment

Operating Temperature -10 ~ 60°C (IFS-402GSM, IFS-803GSM, IFS-1604GSM) -40 ~ 75°C (IFS-402GSM-E,  IFS-803GSM-E, IFS-1604GSM-E)
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40 ~ 85°C

Housing

Rugged Metal, IP30 Protection, Fanless

Dimensions

106 x 62.5 x 135 mm (D x W x H) (IFS-402GSM)
106 x 72 x 152 mm (D x W x H) (IFS-803GSM, IFS-1604GSM)

Weight

0.715kg (IFS-402GSM), 0.79kg (IFS-803GSM) 0.82kg (IFS-1604GSM)

Installation Mounting

DIN Rail mounting or wall mounting (optional)

MTBF

861,962hrs (IFS-402GSM) 612,523hrs (IFS-803GSM)
419,048hrs (IFS-1604GSM)
(MIL-HDBK-217)

Warranty

5 years

Certification

EMC CE
EMI (Electromagnetic Interference) FCC Part 15 Subpart B Class A, CE EN55022 Class A
Railway Traffic EN50121-4
Traffic control NEMA TS2 (IFS-402GSM, IFS-803GSM)
Immunity for Heavy Industrial Environment EN61000-6-2
Emission for Heavy Industrial Environment EN61000-6-4
EMS (Electromagnetic Susceptibility) Protection Level, EN61000-4-2 (ESD) Level 3, Criteria B,EN61000-4-3 (RS) Level 3, Criteria A, EN61000-4-4 (Burst) Level 3, Criteria A, EN61000-4-5 (Surge) Level 3, Criteria B, EN61000-4-6 (CS) Level 3, Criteria A, EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
Safety UL60950-1
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6

Ordering Information

Order Code Description
CT-IFS-402GSM 4x 10/100Base RJ45 + 2x 100/1000Base SFP Managed Industrial Switch-10~60°C
CT-IFS-402GSM-E 4x 10/100Base RJ45 + 2x 100/1000Base SFP Managed Industrial Switch -40~75°C
CF-IFS-803GSM 8x 10/100Base RJ45 + 3x 100/1000Base SFP Managed Industrial Switch -10~60°C
CF-IFS-803GSM-E 8x 10/100Base RJ45 + 3x 100/1000Base SFP Managed Industrial Switch -40~75°C
CF-IFS-1604GSM 16x 10/100Base RJ45 + 4x 100/1000Base SFP Managed Industrial Switch -10~60°C
CF-IFS-1604GSM-E 16x 10/100Base RJ45 + 4x 100/1000Base SFP Managed Industrial Switch -40~70°C

More Information