8 or 16 port GbE switch with 4/12 dual rate SFP

CT-IGS-1604SM & CT-IGS-812SM

Image

Managed industrial grade GbE L2+ switches with 16/8 10/100/1000Base-T ports and 4/12 GbE/100M Ethernet SFP

  • Rugged DIN rail or wall mountable enclosures
  • Standard & wide temperature  models (-10 to 60°C) /(-40 to 75°C)
  • μ-Ring for Redundant Cabling, recovery time<10ms in 250 devices
  • Supports IEEE 1588 PTP V2
  • Provides SmartConfig for quick and easy mass Configuration
  • VLAN support MAC/IP/Protocol based

Overview

The IGS-812SM has 8 LAN ports with RJ-45 connectors that support 10M/100M/1000M Ethernet. There are 12 fiber ports that support 100M/1000M dual rate speed and utilize SFP cages that support any industry standard Fast or Gigabit SFP module. The Ethernet switch is fully manageable; supporting most standard Layer 2 Ethernet configurable settings. The IGS-812SM-E model is identical in every way, except it can support an extended operating temperature range of - 40°C to +75°C.

The IGS-1604SM has 16 LAN ports with RJ-45 connectors that support 10M/100M/1000M Ethernet. There are 4 fiber ports that support 100M/1000M dual rate speed and utilize SFP cages that support any industry standard Fast or Gigabit SFP module.

Image
Ethernut ring

 

IEEE802.3az Energy Efficient Ethernet

Management features provide for the optimisation of power consumption.   Cable lengths are automatically determined and the power for ports with shorter cables is reduced. Ports with inactive connections go into standby mode.   

IEEE 1588 PTP

These switches  support IEEE 1588 PTP V2 for precise time synchronization.  Each port may be configured independently  to operate in Ordinary-Boundary,  Peer to Peer Transparent Clock,  End to End Transparent Clock, Master, or Slave mode.  Accuracy is measured in nanoseconds, making it suitable for time sensitive applications such as mobile phone networks, military systems and large scale financial networks.

PTPv2 supports Multicast messaging by default, but unicast options are also available for specific applications.

Specifications

Item Description
Standard

IEEE 802.3 10Base-T 10Mbit/s Ethernet
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 /Y.1344 ERPS (Ethernet Ring Protection Switching)
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1X Port based and MAC based Network Access Control, Authentication
IEEE 802.3ac Max frame size extended to 1522Bytes.
IEEE 802.3ad Link aggregation for parallel links with LACP(Link Aggregation Control Protocol)
IEEE 802.3x Flow control for Full Duplex
IEEE 802.1ad Stacked VLANs, Q-in-Q
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol forTraffic Prioritization
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
IEEE 802.3az EEE (Energy Efficient Ethernet)

VLAN ID

4094 IEEE 802.1Q VLAN VID

Switch Architecture

Back-plane (Switching Fabric): 40Gbps (IGS-812SM, IGS-1604SM)
Full wire-speed

Flow Control

IEEE 802.3x for full duplex mode Back pressure for half duplex mode

Network Connector

8x 10/100/1000Base-T RJ-45+ 12x 100/1000Base-X SFP connector (IGS-812SM)
16x 10/100/1000Base-T RJ-45+ 4x 100/1000Base-X SFP connector (IGS-1604SM)
RJ-45 UTP port support Auto negotiation speed, Auto MDI/MDI-X function,SFP port support dual speed with DDMI

Console

RS-232 (RJ-45)

Network Cable

UTP/STP above Cat. 5e cable
EIA/TIA-568 100-ohm (100m)

Power Supply

Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block )

Jumbo Frame

9.6KB

IEEE 802.3ac

Max frame size extended to 1522Bytes (allow Q-tag in packet)

MAC Address Table

8K

Memory Buffer

512K Bytes for packet buffer

Alarm Relay Contact

Relay outputs with current carrying capacity of 1 A @24VDC

Removable Terminal Block

Provide 2 redundant power, alarm relay contact, 6 Pin

Operating Temperature

-10 ~ 60°C (IGS-812SM, IGS-1604SM)
-40 ~ 75°C (IGS-812SM-E, IGS-1604SM-E)

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 ~ 85°C

Housing

Rugged Metal, IP30 Protection, Fanless

Dimensions

106 x 72 x152 mm (D x W x H)

Weight

0.795kg (IGS-812SM) 0.82kg (IGS-1604SM)

Ordering Information

Order Code Description
CT-IGS-812SM 8x GbE RJ45 + 12x 100/1000Base-X SFP Switch -10~60°C
CT-IGS-812SM-E 8x GbE RJ45 + 12x 100/1000Base-X SFP Switch -40~75°C
CT-IGS-1604SM 16x GbE RJ45 + 4x 100/1000Base-X SFP Switch -10~60°C
CT-IGS-1604SM-E 16x GbE RJ45 + 4x 100/1000Base-X SFP Switch -40~75°C

More Information