CT-IGS-1608SM-SE & CT-IGS-804SM-SE

Image
Switch

8 or 16 port GbE switch 8/4 dual rate SFP with SyncE & IEEE1588 v2

  • Managed industrial grade L2+ switches with 8/16 10/100/1000Base-T ports and 4/8 GbE/Fast SFP ports that provide stable and reliable transmission
  • Support timing synchronization features (SyncE & IEEE1588 PTP v2) that allow operators to deliver services with optimal stability and continuity in end to end connectivity
  • Housed in rugged DIN rail or wall mountable enclosures
  • Standard operating temperature range models (-10 to 60°C) and wide operating temperature range models (-40 to 75°C)
  • Cable diagnostic, measuring cable normal or broken point distance
  • u-Ring, STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) for redundant cabling
  • Provides 5 instances that each can support μ-Ring, μ-Chain or Sub-Ring type for flexible uses
  • μ-Ring for Redundant Cabling, recovery time<10ms in 250 devices
  • Supports Sync Ethernet allow operators to deliver service with optimal stability and continuity in end-to-end connectivity
  • Supports IEEE 1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port
  • Provides SmartConfig for quick and easy mass Configuration Tool
  • Supports SmartView for Centralized Management

Technical

Spec Text
Standard

IEEE 802.3 10Base-T 10Mbit/s Ethernet
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 /Y.1344 ERPS (Ethernet Ring Protection Switching)
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1X Port based and MAC based Network Access Control, Authentication
IEEE 802.3ac Max frame size extended to 1522Bytes.
IEEE 802.3ad Link aggregation for parallel links with LACP(Link Aggregation Control Protocol)
IEEE 802.3x Flow control for Full Duplex
IEEE 802.1ad Stacked VLANs, Q-in-Q
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
IEEE 802.3az EEE (Energy Efficient Ethernet)

VLAN ID

4094 IEEE 802.1Q VLAN VID

Switch Architecture

Back-plane (Switching Fabric): 24Gbps (IGS-804SM-SE) 48Gbps (IGS-1608SM-SE)
Full wire-speed

Network Connector

8x 10/100/1000Base-T RJ-45 + 4x 100/1000Base-X SFP connector (IGS-804SM-SE)
16x 10/100/1000Base-T RJ-45+ 8x 100/1000Base-X SFP connector (IGS-1604SM-SE)
RJ-45 UTP port support Auto negotiation speed, Auto MDI/MDI-X function, SFP port support dual speed with DDMI

Console

RS-232 (RJ-45)

Network Cable

UTP/STP above Cat. 5e cable
EIA/TIA-568 100-ohm (100m)

Power Supply

Redundant Dual DC 12/24/48V (9.6~60VDC) Input power
Removable Terminal Block for input power connector

Jumbo Frame

9.6KB

MAC Address Table

8K

Environment

Operating Temperature -10 ~ 60°C (IGS-804SM-SE, IGS-1608SM-SE) -40 ~ 75°C (IGS-804SM-SE-E, IGS-1608SM-SE-E)
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40 ~ 85°C

Housing

Rugged Metal, IP30 Protection, Fanless

Dimensions

106 x 72 x152 mm (D x W x H) (IGS-804SM-SE)
116 x 91 x 157 mm (Dx Wx H) (IGS-1608SM-SE)

Weight

0.74kg (IGS-804SM-SE)
1.35kg (IGS-1608SM-SE)

Installation Mounting

DIN Rail mounting, or wall mounting (optional)

MTBF

593,726 Hours (IGS-803SM-SE)
431,610 Hours (IGS-1608SM-SE)
(MIL-HDBK-217)

Warranty

5 years

Certification

EMC CE (EN55024, EN55032)
EMI (Electromagnetic Interference) FCC Part 15 Subpart B Class A, CE
Railway Traffic EN50121-4
Immunity for Heavy Industrial Environment EN61000-6-2
Emission for Heavy Industrial Environment EN61000-6-4
EMS (Electromagnetic Susceptibility)
Protection Level EN61000-4-2 (ESD) Level 3, Criteria B, EN61000-4-3 (RS) Level 3, Criteria A, EN61000-4-4 (Burst) Level 3, Criteria A, EN61000-4-5 (Surge) Level 3, Criteria B, EN61000-4-6 (CS) Level 3, Criteria A, EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
Safety UL60950-1, EN60950-1 (IGS-1608SM-SE) EN60950-1 (IGS-804SM-SE)
Hipot DC 2.25KV for power to chassis ground, Ethernet ports to chassis ground
Surge protection 4KV for UTP and Fibre ports
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6

Ordering Information

Order Code Description
CT-IGS-804SM-SE 8x GbE RJ45 + 4x 100/1000Base SFP Switch with SyncE & IEEE1588 v2-10~60˚C
CT-IGS-804SM-SE-E 8x GbE RJ45 + 4x 100/1000Base SFP Switch with SyncE & IEEE1588 v2-40~75˚C
CT-IGS-1608SM-SE 16x GbE RJ45 + 8x 100/1000Base SFP Switch with SyncE & IEEE1588 v2-10~60˚C
CT-IGS-1608SM-SE-E 16x GbE RJ45 + 8x 100/1000Base SFP Switch with SyncE & IEEE1588 v2-40~75˚C

More Information