4x GbE RJ45 + 2x 1000Base Fibre (SC) with 4x PoE (120W, 24/48VDC)

CT-IGS-402F-4PH24

Image
Switch
  • Unmanaged industrial grade Gigabit PoE switches with 4x 10/100/1000Base-T PoE ports that provide stable and reliable Ethernet transmission
  • Housed in rugged DIN rail or wall mountable enclosure
  • Standard operating temperature range models (-10 to 60°C) and wide operating temperature range models (-40 to 75°C)
  • Provides 4-port IEEE 802.3at/af PoE+ output, 30W/per port
  • Supports power failure alarm message by relay
  • Supports flow control
  • Jumbo frame support
  • Regulate PoE output voltage (52VDC) to stabilize PoE device, and guarantee delivery PoE power distance to 100m
  • Provides a DIP-Switch to set function

Technical

Spec Text
IEEE Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af PoE (Power over Ethernet)
IEEE 802.3at PoE+ (Power over Ethernet enhancements)

Switch Architecture

Back-plane (Switching Fabric):12Gbps
Full wire-speed

Flow Control

IEEE 802.3x flow control, back pressure flow control

Jumbo Frame

10K Bytes

MAC Address Table

8K

Packet Buffer Size

1Mbits

PoE standard & RJ-45 Pin Assignment

4x IEEE 802.3at/af PoE+
2 pairs PoE, PoE+
Positive (V+) : RJ-45 pin 1, 2.
Negative (V-) : RJ-45 pin 3, 6.
Data (1,2,3,6,4,5,7,8)

Network Connector

4 x RJ-45
10/100/1000Base-T auto negotiation speed, Auto MDI/MDI-X function, Full/Half duplex

Network Cable

UTP/STP above Cat. 5e cable
EIA/TIA-568 100-ohm (100m)
Fibre Cable (Multi-mode): 50/125um, 62.5/125um
Fibre Cable (Single-mode): 9/125um

Power Supply

Redundant Dual DC 24/48V (20~57VDC) input power (Removable Terminal Block)
Built-in very high efficiency booster(94~97%) to rise up 52VDC for PoE output
Regulated PoE output voltage (52VDC) to stabilize PoE device, and guarantee delivery PoE power distance to 100metre

PoE Power Budget

Maximum PoE Output power budget 120W, 30W/per port

Alarm Relay Contact

Relay outputs with current carrying capacity of 1A @24VDC

Removable Terminal Block

Provides 2 Redundant power, Alarm relay contact, 6 Pin

Operating Temperature

-10 ~ 60°C

Operating Humidity

5% to 95% (Non-condensing)

Dimensions

106 x 62.5 x 134.8mm (D X W X H)

Housing

Rugged Metal, IP30 Protection, Fanless

Weight

0.68kg

Installation Mounting

DIN Rail mounting, or wall mounting (Optional accessories)

MTBF

635,099 Hours @25°C (IGS-402F-4PH24)
(MIL-HDBK-217)

Ordering Information

Order Code Description
CT-IGS-402F-4PH24-SC001 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 500m MM with 4x PoE (120W, 24/48VDC) -10~60°C
CT-IGS-402F-4PH24-SC002 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 2km MM with 4x PoE (120W, 24/48VDC) -10~60°C
CT-IGS-402F-4PH24-SC020 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 20km SM with 4x PoE (120W, 24/48VDC) -10~60°C
CT-IGS-402F-4PH24-SC040 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 40km SM with 4x PoE (120W, 24/48VDC) -10~60°C
CT-IGS-402F-4PH24-SC020A 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 20km MM WDM TX: 1310nm with 4x PoE (120W, 24/48VDC ) -10~60°C
CT-IGS-402F-4PH24-SC020B 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 20km MM WDM TX: 1550nm with 4x PoE (120W, 24/48VDC ) -10~60°C
CT-IGS-402F-4PHE24-SC001 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 500m MM with 4x PoE (120W, 24/48VDC) -40~75°C
CT-IGS-402F-4PHE24-SC002 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 2km MM with 4x PoE (120W, 24/48VDC) -40~75°C
CT-IGS-402F-4PHE24-SC020 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 20km SM with 4x PoE (120W, 24/48VDC) -40~75°C
CT-IGS-402F-4PHE24-SC040 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 40km SM with 4x PoE (120W, 24/48VDC) -40~75°C
CT-IGS-402F-4PHE24-SC020A 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 20km MM WDM TX: 1310nm with 4x PoE (120W, 24/48VDC ) -40~75°C
CT-IGS-402F-4PHE24-SC020B 4x GbE RJ45 + 2x 1000Base Fibre Switch SC 20km MM WDM TX: 1550nm with 4x PoE (120W, 24/48VDC ) -40~75°C

More Information