4 or 8 port GbE RJ45 + 1/2 x FE/GbE SFP + 2x FE/GbE/2.5G SFP

CT-IGS-803/404SM

Switch
  • Managed Industrial  GbE L2+ switches with 8/4 10/100/1000Base-T ports and 3/4 GbE/100M SFP ports (2 ports support 2.5GbE)
  • Housed in rugged DIN rail or wall mountable enclosure
  • Standard operating temperature range models (-10 to 60°C)
    • wide operating temperature range models (-40 to 75°C)
  • Sophiticated ring management, recovery time<10ms in 250 devices
  • IEEE 1588 PTP V2 for precise time synchronization
  • Supports SmartView for Centralized Management
  • UL60950-1, EN60950-1, EN50121-4, NEMA-TS2, EN61000-6-2, EN61000-6-4, CE, FCC certified

Overview

These models are managed industrial grade GbE L2+ switches with 8/4 10/100/1000Base-T ports plus 3/4 GbE/100M Ethernet SFP ports that provide stable and reliable Ethernet transmission. Housed in rugged DIN rail or wall mountable enclosures, these switches are designed for harsh environments, such as industrial networks, security automation applications, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications (See Figure 1). Standard operating temperature range models (-10 to 60°C) and wide operating temperature range models (-40 to 75°C) fulfill the special needs of industrial automation applications.

1588 Precision Time Protocol

These switches  support IEEE 1588 PTP V2 for precise time synchronization.  Each port may be configured independently  to operate in Ordinary-Boundary,  Peer to Peer Transparent Clock,  End to End Transparent Clock, Master, or Slave mode.  Accuracy is measured in nanoseconds, making it suitable for time sensitive applications such as mobile phone networks, military systems and large scale financial networks.

IGS 403 example application with ring topology

Security

The units are equipped with both RADIUS and TACACS+ authentication for use in sensitive networks where security is paramount. SSL & SSH2 are also supported.

Data Sheet

LA-IGS+404SM-803SM.pdf

Specifications

Item Description
Standard

IEEE 802.3 10Base-T 10Mbit/s Ethernet
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fibre-Optic
IEEE 802.3cb 2.5GBase-X
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 /Y.1344 ERPS (Ethernet Ring Protection Switching)
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1X Port based and MAC based Network Access Control, Authentication
IEEE 802.3ac Max frame size extended to 1522Bytes.
IEEE 802.3ad Link aggregation for parallel links with LACP(Link Aggregation Control Protocol)
 IEEE 802.3x Flow control for Full Duplex
IEEE 802.1ad Stacked VLANs, Q-in-Q
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritisation
IEEE 802.1ab Link Layer Discovery Protocol
VLAN ID

4094 IEEE 802.1Q VLAN VID
Switch Architecture

Back-plane (Switching Fabric): 22Gbps (IGS-404SM) 28Gbps (IGS-803SM)
Full wire-speed
Network Connector

4x 10/100/1000Base-T RJ-45 + 2x FE/GbE SFP slot + 2x FE/GbE/2.5GbE SFP slot (IGS-404SM)
8x 10/100/1000Base-T RJ-45 + 1x FE/GbE SFP slot + 2x FE/GbE/2.5GbE SFP slot (IGS-803SM)
RJ-45 UTP port support Auto negotiation speed, Auto MDI/MDI-X function, SFP port support dual speed with DDMI
Console

RS-232 (RJ-45)
Network Cable

UTP/STP above Cat. 5e cable
EIA/TIA-568 100-ohm (100m)
Power Supply

Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block )
Jumbo Frame

9.6KB
IEEE 802.3ac

Max frame size extended to 1522Bytes (allow Q-tag in packet)
MAC Address Table

8K
Memory Buffer

512K Bytes for packet buffer
Removable Terminal Block

Provide 2 redundant power, alarm relay contact, 6 Pin
Environment

Operating Temperature -10 ~ 60°C (IGS-404SM, IGS-803SM) -40 ~ 75°C (IGS-404SM-E, IGS-803SM-E)
Operating Humidity 5% to 95% (Non-condensing)
Storage Temperature -40 ~ 85°C
Housing

Rugged Metal, IP30 Protection, Fanless
Dimensions

106 x 62.5 x 135 mm (D x W x H) (IGS-404SM)
106 x 72 x152 mm (D x W x H) (IGS-803SM)
Weight

0.725kg (IGS-404SM)
0.78kg (IGS-803SM)
Installation Mounting

DIN Rail mounting, or wall mounting (optional)
MTBF

861,962 Hours (IGS-404SM)
612,523 Hours (IGS-803SM)
(MIL-HDBK-217)
Warranty

5 years
Certification

EMC CE
EMI (Electromagnetic Interference) FCC Part 15 Subpart B Class A, CE EN55022 Class A
Railway Traffic EN50121-4
Traffic control NEMA TS2
Immunity for Heavy Industrial Environment EN61000-6-2
Emission for Heavy Industrial Environment EN61000-6-4
EMS (Electromagnetic Susceptibility) Protection Level EN61000-4-2 (ESD) Level 3, Criteria B, EN61000-4-3 (RS) Level 3, Criteria A, EN61000-4-4 (Burst) Level 3, Criteria A, EN61000-4-5 (Surge) Level 3, Criteria B, EN61000-4-6 (CS) Level 3, Criteria A, EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
Safety UL60950-1
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6

Ordering Information

Order Code Description
CT-IGS-404SM 4x GbE RJ45 + 2x FE/GbE SFP + 2x FE/GbE/2.5G SFP Industrial Managed Switch-10~60°C
CT-IGS-404SM-E 4x GbE RJ45 + 2x FE/GbE SFP + 2x FE/GbE/2.5G SFP Industrial Managed switch-40~75°C
CT-IGS-803SM 8x GbE RJ45 + 1x FE/GbE SFP + 2x FE/GbE/2.5G SFP Industrial ManagedSwitch -10~60°C
CT-IGS-803SM-E 8x GbE RJ45 + 1x FE/GbE SFP + 2x FE/GbE/2.5G SFP Switch-40~75°C

More Information

You might also be interested in...

CT-IGS-600-4PH24
Switch
6x GbE RJ45 with 4x PoE (120W, 24/48VDC)
CT-INJ-IG02-PH
INJ-IG02
Gigabit Passive PoE Injector
MW7212G-48P
12 port gigabit industrial switch
12 Port Gigabit PoE+ switch with 4 fibre ports
TN-SISTP1040-342-LRT
Unmanaged Hardened Gigabit Ethernet PoE+ Switch
Unmanaged Hardened Gigabit Ethernet PoE+ Switch
Product Category
Industrial Gigabit Managed Switches
Industrial Managed Switches