Multiservice Access Multiplexer (2U)

CT-ISAP2000

6 slots available for hot-swappable I/O cards and two slots are provided for power supplies
16 channel Main E1 LTU card
All cards hot-swapable
N*64K, RS232(Sync/Async) Ethernet, Voice etc.
AC and/or DC powered

Overview

The iSAP2000 is a 2U 19”6 slot rack mounted E1 Time Division Multiplexer for fractional E1 network access, which is designed for nonstop operation. There are 6 slots available for hot-swappable I/O cards and two slots are provided for power supplies. Uplink supports E1 copper connection, with a maximum of up to 96 x E1 cross connect for Voice and Data.

E1 PDH multiplexor that handles E1, RS530, RS232, Voice and Ethernet

The iSAP2000 optionally accommodates up to two separate power supplies, which may derive power from AC (110/220) or DC (-36~72V) power sources. When two power supplies are installed, the modules provide complete power redundancy and are hot swappable without interrupting data transmission. The iSAP2000 provides E1 copper uplink, with a maximum of 96 E1 channels with cross connection for Voice and Data. Interfaces include E1, RS232, V35, RS530, FXS, FXO, Ethernet & E&M.

Aggregate Card

iSAP-8E1R
iSAP-16E1R

Available in 8,16 E1 channels
Supports PCM31 or PCM30 framed/unframed
Path / Card Redundancy / Hot Swappable
E1 timeslots can support cross-connect function
E1 channel can act as Sub-E1 for drop & insert

RS232 Sync/Asyn Card

iSAP-RS232

Serial RS232 card for ISAP TDM multiplexor

Six independent channels
N x 64 setting from any E1 channel
Transparent asynchronous rates up to 115.2kbps
Synchronous 64 or 128Kbps, DCE mode
Diagnostic loop backs
Hot swappable

N x 64 Synchronous Serial Card

iSAP-Data

Serial RS530 X.21 V.35 card for TDM multiplexor

Four independent Synchronous channels
N x 64 setting from any E1 channel
Each channel operates in native DCE mode
Diagnostic loop backs
LED indicators for Power, Alarm, RD/TD activity
Hot swappable

Fast Ethernet Bridge Card

iSAP-ET100

Ethernet bridge card for SGH multiplexor

Four independent Ethernet over E1 channels
Utilizes HDLC WAN encapsulation
MAC Address learning table with 5 minute aging
Auto-MDIX and Auto-Negotiation
Hot swappable

E&M Voice

iSAP-E&M

Eight independent channels
2/4 wire independent setting
1x 64 setting from any E1 channel
E&M Signaling PBX trunks
Provides E line, M line, SB (battery) and SG (ground) lines
Supports types I, II, III, IV or V
G.711 Codec
LED indicators for Power, Alarm, activity
Hot swappable

FXS Voice

iSAP-FXS

Eight independent channels
2 wire independent setting
G.711 Codec
1× 64 setting from any E1 channel
Provides ring function
Supports caller-ID forwarding
PSTN extension or direct "Hot-line"
Links telephone to telephone or extends POTS
LED indicators for Power, Alarm, RD/TD activity
Hot swappable

FXO Voice

iSAP-FXO

Eight independent channels
2 wire independent setting
G.711 Codec
1× 64 setting from any E1 channel
PCM30 R2 Signaling PSTN trunks
Links PBX to PBX or extends POTS
LED indicators for Power, Alarm, activity
Hot swappable

Data Sheet

LA-iSAP2000.pdf

Specifications

Item	Description
Management	NMS 10/100Base-TX Console RS232
iSAP-8E1, iSAP-16E1	Interface Supports 8E1, 16E1 two types interface E1 Cross connect 96 x E1 transparent cross connect, supports E1, time slot CAS cross connect Supports 16 time slot CAS follow voice time cross connect Line Impedance 120 / 75 ohms Frame format CAS(PCM30)/CCS(PCM31) Connector RJ
SAP-RS232	Data rate ≤38.4kbps Async or 64/128kbps Sync Ports 6-port; Interface RS232
iSAP-N*64K/V35	Data rate N × 64kbps(N=1~30 or 31) Ports 4-port; Connector V.35 Interface
iSAP-ET100	Standards IEEE 802.3, 802.3u MDI/MDIX Auto Data rate 10/100Mbp Ports 4-port; Connector RJ45
iSAP-E&M	Loop current 5~30 mA, maximum 70mA Ports 8-port; Connector RJ45
iSAP-FXS	ITU-T Standard G.712/G.713/G.714 Line resistance 600Ω Off-hook current 25mA Line distance 2km Ports 8-port On-hook current 10mA+/-3mA Effective Ring Frequency: 25Hz Voltage: 75V, peak to peak110V MAX line resistance: 1500Ω Connector RJ45
iSAP-FXO	ITU-T Standard G.712/G.713/G.714 Line resistance 600Ω Line distance 2km Ports 8-port Caller ID Supports DTMF, FSK Standard; Connector RJ45
Dimensions	440 × 300 × 88mm (D x W x H)
Operating:	0~60°C Storage:-25~70°C
Humidity:	10~90%
Power	AC 220V: 165~265V, 50~60Hz DC -48V:-36~-76VDC
Power Consumption	< 40W

Ordering Information

Order Code	Description
CT-ISAP2000-CH	2U 19'' 6 slots Chassis with bulit-in CPU card, power modules not included
CT-ISAP2000/AC	AC power plug-in module (165 to 265 VAC)
CT-ISAP2000/DC	DC Power plug-in module (±36 to ±76 VDC)
CT-ISAP-EMS	EverLink2000 EMS software for iSAP5100 and iSAP2000
CT-ISAP-8E1R	8 channels Main-E1 LTU card: Fractional E1 RJ45
CT-ISAP-16E1R	16 channels Main-E1 LTU card: Fractional E1 RJ45
CT-ISAP-CAB-RJ45/4BNC	2ch E1 RJ45 to 4BNC cable (1.5 m)
CT-ISAP-FXO	8 channels FXO interface card
CT-ISAP-FXS	8 channels FXS interface card
CT-ISAP-E&M	8 channels 2/4 wires E&M voice interface card
CT-ISAP-RS232	6 channels RS-232 interface card (V4.0), Low speed: 128kbps 19.2kbps Async
CT-CAB-DB62DB25F6-232-LS	RS-232 adapter cable for low speed: DB62 Male to 6x DB25 Female, 1M
CT-ISAP-ET100	4 channels 10/100Base-TX Ethernet Bridge card
CT-ISAP-DATA	4 channels V.35/X.21/RS530/RS449 cards
CT-CAB-HP68MB34F4-V35	V35 adapter cable for High speed: HP68 Male to 4x MB34 Female, 1M
CT-CAB-HP68DB25F4-530	RS530 adapter cable for High Speed: HP68 Male to 4x DB25 Female, 1M
CT-CAB-HP68DB15F4-X.21	X21 adapter cable for High speed: HP68 Male to 4x DB15 Female, 1M
CT-CAB-HP68DB37F4-449	RS449 adapter cable for High Speed: HP68 Male to 4x DB37 Female, 1M