Image
E1 G.703 Fibre Optic Modem
CT-FIB1-E1
Image
- Extend full or fractional E1 G703 circuits over fibre cabling
- Multi and Singlemode fibre options
- RJ-45 and Coax (BNC) E1 presentations
- Simple DIP switch configuration
- Supports AMI or B8ZS/HDB3 line codes
- Electrical and optical loop back tests included
Overview
The FIB1-E1 is a fiber optic modem for the transport of G.703 E1 information. The BNC model provides unbalanced 75 Ohm coaxial E1 connections while the RJ-45 model provides balanced 120 Ohm E1 over twisted pair wiring. Configuration is achieved via simply setting the onboard DIP switches.
The FIB1-E1 is available with either multimode and singlemode optical transceiver. When the FIB1-E1 is placed in the FRM301 rack with SNMP management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port and initiate local or far end loopback tests.
Specifications
| Item | Description |
|---|---|
| E1 Interface | FIB1-E1B - 75 ohms (2 x BNC) |
| E1 Standards | ITU-T G.703, G.704, G.706, G.732, G.823 |
| Optical Interface | Multimode - 1310nm ST 2km |
| AC Power Adapter | Input: 110 VAC +/- 10% |
| Physical | Height 122.6 mm |
| Weight | 340g |
| Temperature | 0 - 50 C (Operating) |
Ordering Information
| Order Code | Description |
|---|---|
| CT-FIB1-E1B-ST2 | E1 G703 Fibre Optic Modem 75ohm BNC, ST Multimode 2km |
| CT-FIB1-E1R-ST2 | E1 G703 Fibre Optic Modem 120 ohm RJ45, ST Multimode 2km |
| CT-FIB1-E1B-ST15 | E1 G703 Fibre Optic Modem 75ohm BNC, ST Singlemode 15km |
| CT-FIB1-E1R-ST15 | E1 G703 Fibre Optic Modem 120 ohm RJ45, ST Singlemode 15km |
More Information
Product Category