8 Port Gigabit Managed Industrial TSN Switch

MW7208-TSN-2GF-6GT

Image
  • 2 × Gigabit SFP  and 6 × 10/100/1000BaseT Ports
  • Time Sensitive Networking (TSN) support for :-
     
    • Timing and Synchronization - 802.1AS gPTP
    • Low latency transmission -  802.1Qbv/bu
    • Path selection and fault tolerance - 802.1CB FRER
  • Secure Management via HTTPS, SNMPv3 and SSH
  • AAA via RADIUS and TACACS+
  • IP40 DIN Rail mount in an aluminum alloy shell
  • Dual DC9~60V power input or single AC85~264V/DC110~370V
  • Wide operating temperature range -40°C to +75°C

Overview

The MISCOM7208-TSN-2GF-6GT is an 8 port Gigabit layer 2 managed industrial Ethernet switch that incorporates the IEEE802.1 Time Sensitive Networking (TSN) features to facilitate highly reliable, deterministic and low latency transmission of data flows throughout a TSN enabled network.

Timing and Synchronization

The IEEE802.1AS standard aka 'Generalised Precision Timing Protocol or gPTP' provides for distribution of sub-microsecond time synchronization information.

Low latency transmission

The IEEE standards 802.1Qbv/bu are quality of services (QoS) mechanisms designed to make Ethernet more deterministic. By using a 'time aware scheduler' time critical traffic can be given priority over that of background traffic.

Path selection and fault tolerance

The IEEE 802.1CB Frame Replication and Elimination for Reliability (FRER) protocol transmits duplicate frames over multiple paths, to enable redundancy for applications that cannot tolerate lost packets.

 

In addition to Time Sensitive Networking features the MISCOM7208-TSN has 6  x Gigabit copper ports and 2 x Gigabit SFP ports. Designed for standard 35mm DIN rail installation and encased in a robust aluminum alloy shell. It has a fanless design with efficient heat dissipation and a wide operating temperature range of -40°C to +75°C.

Image
802.1AS Ethernet switch
Power and Alarm

Secure management and configuration is provided by HTTPS, SNMPv3 and SSH. The MISCOM7208-TSN provides a full suite of advanced configuration options for industry standard protocols such as 802.1Q VLANs, QoS, MSTP, ERPS, LACP and IGMP. Access control can be provisioned via 802.1x and AAA functions via RADIUS or TACAS+.

The MISCOM7208-TSN is perfectly suited to any industrial environment where superior levels of traffic engineering are required.

Specifications

Item Description
Time Sensitive Networking (TSN)

IEEE 802.1AS (generalized PTP, gPTP)
IEEE 802.1Qbu (Frame Preemption, FP)
IEEE 802.1Qbv (Time-Aware Shaper, TAS)
IEEE 802.1Qci (Per-Stream Filtering and Policing, PSFP)
IEEE 802.1CB (Frame Replication and Elimination for Reliability, FRER)

VLAN, Port, MAC Configuration, Multicast

802.1Q VLAN, VLAN based on MAC/IP subnet/protocol/stream, VLAN translation, PVLAN
Port speed, duplex mode, flow control, maximum transmission unit
Per Port Rate Limiting, storm suppression, storm detection, and port statistics
Port aggregation, static aggregation, dynamic aggregation LACP
MAC address aging and learning limitations, static MAC address binding
IGMP Snooping and filtering

Redundancy

Fast ring network MW-Ring protocol
ERPSv1/v2
STP/RSTP/MSTP

Management & Security

HTTPS, SSH service control, HTTP/HTTPS, SNMP, TELNET/SSH access management
Per user privilege level and port security
802.1X port authentication, AAA authentication, RADIUS, TACACS+
Source IPv4/IPv6 protection and ARP protection
Layer 2 to 4 Access Control Lists
IEEE 1588v2 (Precision Time Protocol, PTP)
QoS, SP, DWRR queue scheduling
DHCPv6 clients, DHCPv4 clients/servers/listeners/relays
SNMPv1/v2c/v3, SNMP Trap v1/v2c/v3, RMON, LLDP, LLDP MED
Port mirroring, DDM, Ping IPv4/IPv6, Traceroute IPv4/IPv6
User permission management, logging, NTP client, and daylight saving time
Configuration file and firmware management

Capacity

Switching Method - Store-and-Forward
Backplane Bandwidth - 23Gbps
Buffer Size - 1.25Mbit
Mac Address Table - 8K

Interfaces

1G Fiber Port - 2×1000Base-X SFP
1G Copper Port - 6×10/100/1000Base-T  mRJ45 ports
Relay - 1 relay alarm output, 5.08mm pitch 3-pin terminal block
CONSOLE - 1 x RS232 console port (RJ45)
Button - One-click restart or restore the factory settings
LEDs -  Power, operation, alarm, optical port, TSN, ring, TX port speed and connection/activity

Power

MISCOM7208TSN-2GF-6GT

Input Voltage - Dual DC9~60V power input, non-polarity
Power Consumption <12W@DC12V(full load)
Connector - 5.08mm pitch 5-pin terminal block
Built-in over-current protection

MISCOM7208TSN-2GF-6GT-AD220

Input Voltage - Single AC85~264V/DC110~370V power supply
Power Consumption - <12W@AC220V
Connector - 5.08mm pitch 5-pin terminal block
Built-in over-current protection

Physical

Dimensions - 160×58×122 mm (DIN rail mounting clip excluded)
Installation - 35mm DIN rails
Ingress Protection - IP40
Weight - DC model - 0.86kg and AC model - 0.9kg

Environmental

Operating Temp -40℃~+75℃
Storage Temp -40℃~+85℃
Relative Humidity 5%~95% (non-condensing)

EMC

IEC 61000-4-2 (ESD): Level 4
Contact discharge ± 8kV
Air discharge ± 15kV
Power supply: common mode ± 4kV, differential mode ± 2kV
Ethernet port: common mode ± 4kV, differential mode ± 2kV
IEC 61000-4-4(EFT): Level 4
Power supply: ± 4kV
Ethernet port: ± 2kV

Certification

CE, FCC, RoHS

Ordering Information

Order Code Description
MW7208TSN-2GF-6GT Layer 2, 8-Port TSN Switch (Dual DC Power Inputs)
MW7208TSN-2GF-6GT-AD220 Layer 2, 8-Port TSN Switch (Single AC/DC power Input)

More Information