10G Layer 3 TSN Industrial Ethernet Switch, IEEE802.1AS

MW8036TSN-4XGF-24GF-8GT

802.1AS Time Sensitive Switch
  • 4 × 10G SFP+ Ports, 24 × 1G SFP Ports, 8 Gigabit RJ45 Ports
  • IPv4 / IPv6 static routing, RIPv 1 / v2, OSPF
  • Time Sensitive Networking (TSN) support for :-
     
    • Timing and Synchronization - 802.1AS gPTP
    • Low latency transmission -  802.1Qbv/bu
    • Path selection and fault tolerance - 802.1CB FRER
  • Secure Management via HTTPS, SNMPv3 and SSH
  • AAA via RADIUS and TACACS+
  • AC85~264V / DC110~370V single or dual redundant power inputs
  • Wide operating temperature range -40°C to +75°C

Overview

The MW8036TSN-4XGF-24GF-8GT layer 3 10G TSN industrial Ethernet switch supports 4 x 10G SFP+ ports, 24 x 1G SFP ports, and 8 x 1G RJ45 ports.

In addition to providing a rich variety of layer 3 routing protocols including static, RIP and OSPF for both IPv4 and IPv6 the MW8036TSN incorporates 'Time Sensitive Networking' features to facilitate a low latency, highly resilient  and deterministic traffic flows via features such as:-

Timing and Synchronization

The IEEE802.1AS standard aka 'Generalised Precision Timing Protocol or gPTP' provides for distribution of sub-microsecond time synchronization information.

Low latency transmission

The IEEE standards 802.1Qbv/bu are quality of services (QoS) mechanisms designed to make Ethernet more deterministic. By using a 'time aware scheduler' time critical traffic can be given priority over that of background traffic.

Path selection and fault tolerance

The IEEE 802.1CB Frame Replication and Elimination for Reliability (FRER) protocol transmits duplicate frames over multiple paths, to enable redundancy for applications that cannot tolerate lost packets.

TSN 802.1AS Switch front view

 

 

 

The MW8036TSN-4XGF-24GF-8GT is an industrial grade unit with a fanless design. The unit is rated to IP40 and has a wide operating temperature range of -40℃ ~ + 75℃.

Secure management and configuration is provided by HTTPS, SNMPv3 and SSH. The MISCOM7208-TSN provides a full suite of advanced configuration options for industry standard protocols such as 802.1Q VLANs, QoS, MSTP, ERPS, LACP and IGMP. Access control can be provisioned via 802.1x and AAA functions via RADIUS or TACAS+.

The combination of high bandwidth interfaces, Layer 3 architecture and TSN components places the MW8036 at the heart of any modern industrial process control network.

Data Sheet

LA-8036TSN-4XGF-24GF-8GT-2AD220 Datasheet-V1.0-230912.pdf

Specifications

Item Description
Time Sensitive Networking (TSN)

IEEE 802.1AS (generalized PTP, gPTP)
IEEE 802.1Qbu (Frame Preemption, FP)
IEEE 802.1Qbv (Time-Aware Shaper, TAS)
IEEE 802.1Qci (Per-Stream Filtering and Policing, PSFP)
IEEE 802.1CB (Frame Replication and Elimination for Reliability, FRER)
Routing

IPv4/IPv6 static routing
RIPv1/v2
OSPF
VRRP
VLAN, Port, MAC Configuration, Multicast

802.1Q VLAN, VLAN based on MAC/IP subnet/protocol/stream, VLAN translation, PVLAN
Port speed, duplex mode, flow control, maximum transmission unit
Per Port Rate Limiting, storm suppression, storm detection, and port statistics
Port aggregation, static aggregation, dynamic aggregation LACP
MAC address aging and learning limitations, static MAC address binding
IGMP Snooping and filtering
Redundancy

Fast ring network MW-Ring protocol
ERPSv1/v2
STP/RSTP/MSTP
Management & Security

HTTPS, SSH service control, HTTP/HTTPS, SNMP, TELNET/SSH access management
Per user privilege level and port security
802.1X port authentication, AAA authentication, RADIUS, TACACS+
Source IPv4/IPv6 protection and ARP protection
Layer 2 to 4 Access Control Lists
IEEE 1588v2 (Precision Time Protocol, PTP)
QoS, SP, DWRR queue scheduling
DHCPv6 clients, DHCPv4 clients/servers/listeners/relays
SNMPv1/v2c/v3, SNMP Trap v1/v2c/v3, RMON, LLDP, LLDP MED
Port mirroring, DDM, Ping IPv4/IPv6, Traceroute IPv4/IPv6
User permission management, logging, NTP client, and daylight saving time
Configuration file and firmware management
Capacity

Switching Method - Store-and-Forward
Backplane Bandwidth - 180Gbps
Buffer Size - 32Mbit
Mac Address Table - 32K
Interfaces

10G Fibre Port - 4 x 10GBase-X SFP+
1G Fibre Port - 24×1000Base-X SFP
1G Copper Port - 8×10/100/1000Base-T  mRJ45 ports
Relay - 1 relay alarm output, 5.08mm pitch 3-pin terminal block
CONSOLE - 1 x RS232 console port (RJ45)
LEDs -  Power, operation, alarm, port
Power

Input Voltage - AC85~264V / DC110~370V, dual power redundancy
Power Consumption - ＜50W@AC220V(full load)
Connector - 5.08mm pitch 5-pin terminal block
Built-in over-current protection
Physical

Dimensions - 482.6×44×315 mm (Including mounting brackets)
Installation - Standard 19-inch 1U rack mount
Ingress Protection - IP40
Weight - 4.5kg
Environmental

Operating Temp -40℃~+75℃
Storage Temp -40℃~+85℃
Relative Humidity 5%~95% (non-condensing)
EMC

IEC 61000-4-2(ESD): Level 4(Contact discharge±8kV, air discharge±15kV)
IEC 61000-4-5(Surge): Level 4
(Power: common mode±4kV, differential mode±2kV
network port: common mode±6kV,differential mode±2kV
IEC 61000-4-4(EFT): Level 4(Power: ±4kV, Copper port: ±2kV)
Certification

CE, FCC, RoHS

Ordering Information

Order Code Description
MW8036TSN-4XGF-24GF-8GT-2AD220 10G Rackmount L3 36 Port TSN Industrial Ethernet Switch, Dual AC/DC PSU

More Information

You might also be interested in...

MW7208-TSN-2GF-6GT
Time Sensitive Networking 802.1AS Switch
8 Port Gigabit Managed Industrial TSN Switch
CT-IGS-1608/804SM-SE-8PH
Switch
16/8x GbE RJ45 + 8/4x 100/1000Base SFP with SyncE and 8x PoE (240W, 48VDC)
MW8220G-488
10G Layer 3 switch
20 port layer 3 switch with 10G
Product Category
Industrial Gigabit Rackmount Switches
Industrial 10Gbps Rackmount Switches