E1/T1 & X.21, V.35 or RS530 over Ethernet/IP

NE-PB-PLUS-TDM-1VX

Image

Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP

• Highly accurate & stable clock recovery
• G.823/4 Synchronization levels
• Single E1/T1 interface
• Two 10/100/1000Mbps RJ45 interfaces
• Single 100/1000Mbps SFP interface
• Single RS530, V.35, or X.21 interface
• Support for Jumbo Packets up to 9,600 bytes on Ethernet ports
• Port based VLAN, 802.1Q VLAN including Q-in-Q

Technical Notes

TDM over IP – What is it and how can it benefit me?

TDM over IP provides the ability for legacy TDM devices to communicate via modern packet switched IP networks. These legacy devices would typically have E1, T1 or serial interfaces. Our range of TDM over IP solutions enable connectivity for this legacy equipment over contemporary Ethernet / IP networks.

Specifications

Item Description
Clock Recovery

Capable of exceeding G.823/4 Synchronous Interface requirements (subject to network performance

TDM Port (E1)

1 port
• User switchable E1/T1
• RJ45 connector
• Presents as DCE (cables for DTE)
• 120 Ohm
• 75 Ohm user-selectable via convertor cable
• G.703 unstructured
• G.704 channelized
• ITU G.706
• Selectable CRC4/non-CRC4
• HDB3
• Transparent to user signalling

TDM Port (T1)

• 1 port
• User switchable E1/T1
• RJ45 connector
• Presents as DCE (cables for DTE)
• 100 Ohm
• Unframed 1.544Mbps
• Framed 1.536Mbps CCS
• ESF or D4 selectable
• B8ZS or AMI selectable
• Transparent to user signalling

Local Management Port

• RJ12
• Asynchronous
• Auto-sensing to 115kbps
• Also remote access via packet network

IP & MAC Address

 MAC address per port, IP address, subnet mask and default gateway. Support for DHCP

Dimensions

WDH: 8.86” x 7.87” x 1.73” [225mm x 200mm x 44mm]

Environment

Operating Temperature -20°C to +65°C;  Humidity 10-90% non-condensing

Regulatory Compliance

FCC Class A; CE Mark; CB Scheme Certified
• MET Mark (North American safety)
• EN60950-1:2006+A1:2010+A12:2011
• EN55022:2010; EN55024:2010

Warranty

1 Year

Ordering Information

Order Code Description
NE-PB-PLUS-TDM-1VX-AC Single E1/T1 & X.21, V.35 or RS530 serial circuit over CESoPSN • Two 10/100/1000Base-T ports • Single 100/1000 SFP slots • Single DB25 (female) connector; AC Power
NE-PB-PLUS-TDM-1VX-DC Single E1/T1 & X.21, V.35 or RS530 serial circuit over CESoPSN • Two 10/100/1000Base-T ports • Single 100/1000 SFP slots • Single DB25 (female) connector; DC Power

More Information