Copper to fibre Gigabit Ethernet PoE Converter
LN-SGPOE-10xx
- SFP ports support either 100Base or 1000Base fibre
- Under/Over-Current Protection
- Link Pass Through available
- PoE Legacy Detect for non-IEEE 802.3af compatible
- 48 VDC PSE Output Voltage
Overview
PoE media converters combine data received over a fibre optic link providing power to Data Terminal Equipment (DTE) Powered Devices (PD) over unshielded twisted pair cable.
Transition Networks’ AC powered PoE media converters combine data received over a fibre optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Powered Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af standard. The converters also includes a PD signature sensing and power monitoring feature per the IEEE 802.3af standard. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities (see switches section under Specifications).
In addition, with the PSE/LPT switch enabled, a loss of Fibre RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize, also known as Powered Device Reset. The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard as well as select legacy PDs. The PoE converter is capable of inserting power on data mode A or mode B pairs of the MDI.
Technical Notes
What is Power over Ethernet ?
Power over Ethernet, commonly abbreviated to PoE, is a technology that enables DC power to be delivered over the same twisted pair copper cabling as the data. This allows end devices such as IP phones, CCTV cameras and wireless access points to receive power across the network and avoids the need to install electrical cabling and a power source at the remote end.
Data Sheet
Specifications
Item | Description |
---|---|
Standards | IEEE 802.3 |
MAC Address | 8K |
Max Packet Size | 1632 bytes untagged |
Switches | SW1: Auto-Negotiation TP On/Off |
Dimensions | Width: 4.4” [112 mm] |
Power Consumption | 20 Watts (max |
Power Supply | External AC/DC required; 48 VDC 0.67A Output; |
Environment | Operating: 0°C to 40°C |
Compliance | EN55022:1994+A1:1996+A2:1997 Class A, |
Warranty | Lifetime |
Ordering Information
Order Code | Description |
---|---|
TN-SGPOE1013-100-UK | 10/100/1000Base-T PoE (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm multimode (SC) |
TN-SGPOE1039-100-UK | 10/100/1000Base-T PoE (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm multimode (LC) |
TN-SGPOE1040-100-UK | 10/100/1000Base-T PoE (RJ-45) [100 m/328 ft.] to 100/1000Base-X SFP Slot |