ION Fast Ethernet media converter

The ION C2110 is a media converter module that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fibre optic cabling into 100Base-TX copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential. The ION C2110 is a manageable device when installed in a managed ION chassis.

Image

Auto-Negotiation
The Auto-Negotiation feature allows the C2110 to automatically configure itself to achieve the best possible mode of operation over a link. The C2110 broadcasts its speed (100 Mb/s) and duplex capabilities (full or half) to the other devices and negotiates the best mode of operation. Auto-Negotiation allows quick and easy installation because the optimal link is established automatically. No user intervention is required.
A scenario where the C2110 is linked to a non-negotiating device, disable Auto-Negotiation. In this instance, the mode of operation will drop to the least common denominator between the two devices (e.g., 100 Mb/s, half-duplex). Disabling this feature enables forcing the connection to the best mode of operation.

Pause Control Frame
The pause control feature can improve network performance by allowing one end of the link to signal the other to discontinue frame transmission for a set period of time to relieve buffer congestion. Note: If the pause control feature is present on all network devices attached to the C2110(s), enable the pause control feature on the C2110(s). Otherwise, disable this feature.