E3/T3 Coax over fibre modem, singlemode, multimode or CWDM

TN-C6210

Managed media converter module that provides a solution for those users that need to extend DS3-T3/E3 connections over fibre.
Available in versions that support fixed fibre connectors as well as SFP fibre modules offering support for a variety of fibre types, distances, and wavelengths to provide maximum flexibility across a variety of network topologies.
CWDM SFPs can also be utilized to further increase the bandwidth capacity of the fibre infrastructure.
C6210 DS3-T3/E3 converters must be used in pairs.
A typical installation will include a modular card installed in a managed ION chassis linked over fibre to a stand-alone S6210 in a remote location.

Item	Description
Standards	ANSI ITU-TS ETSI G.823 for jitter tolerance G.755 for loss of signal
Coax Connectors	75 ohm coax
Fibre Connectors	SFP: LC connector Uses standard 100Base-X/OC-3; SFP Fixed Optics: ST or SC connector
Data Rates	DS3/T3 = 44.7Mbps; E3 = 34.4Mbps
Status LEDs	Power, Coax link status, coax loopback status, AIS on coax link; Fiber link status,fibre loopback status, AIS on fibre link
Dimensions	Width: 0.86” [22 mm] Depth: 6.5” [165 mm] Height: 3.4
Power Consumption	2.5 Watts
Environment	Operating: 0°C to 50°C Humidity: 5% to 95% (non-condensing) Altitude: 0 – 10,000 ft.
MTBF	Greater than 250,000 hours (MIL-HDBD-217F) Greater than 687,000 hours (Bellcore)
Compliance	CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty	Lifetime

Order Code	Description
TN-C6210	T3/E3 Network Interface Device Module
TN-C6210-3013	(2) Coax (BNC) to 1300nm multimode (SC) [2 km/ 1.2 mi.] Link Budget: 11.0 dB
TN-C6210-3014	(2) Coax (BNC) to 1310nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB
TN-C6210-3040	(2) Coax (BNC) to *SFP slot