TN-CPSVT

Media Converter

X.21/RS530/RS232 Fibre Optic Modem

  •  CPSVT Series is a managed media converter module for high speed serial applications.
  • Converter allows fibre cabling to be integrated into X.21, RS449, RS530, RS232 or V.35 network connections.
  • There are multiple versions available supporting single mode or multimode fibre through SC fibre connectors.
  • Multiple serial protocol interface is made through a universal 26-pinconnector along with custom patch cable assemblies

Technical

Spec Text
Standards

ITU-T
ISO-2593
Data Rate

1.2 Kbps to 10 Mbps
Switches

Side panel, external DCE speed switch, sixteen positions:
Speeds can also be set on DCE converters locally or remotely via software.
Loopback Selector Switch:
Position: Loop Fiber Back & Loop Copper Back
Position: Normal Operation
Jumpers

Jumper : Hardware/Software mode
Jumper : RX Clock Polarity: Set to sample the receive data on the rising or falling edge of the receive clock
Jumper : TX Clock Polarity: Set to sample the transmit data on the rising or falling edge of the receive clock
Status LEDs

 In loopback mode;
 Link is up;
 In loopback mode;
 
Dimensions

Width: 0.86” [22 mm]
Depth: 5" [127 mm]
Height: 3.4” [86 mm]
Power Consumption

5.0 Watts
Environment

Environment specs are dependent on the chassis chosen
Operating: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Compliance

CISPR/EN55022, EN55024, EN60950 Class A,
FCC Class A, CE Mark
Warranty

Lifetime

Ordering Information

Order Code Description
TN-CPSVT2614-100 26-pin to 1310nm single mode (SC)
TN-CPSVT2629-100 26-pin to 1310nm TX/1550nm RX single fibre single mode (SC)
TN-CPSVT2629-101 26-pin to 1550nm TX/1310nm RX single fibre single mode (SC)

More Information

Data Sheet
TNCPSVT-LA.pdf
Product Category
Fibre Optic Modems for Serial Data