DC Power Supply Module For the ION 19-Slot Chassis
TN-IONPS-D-R1
- ION Platform is an intelligent, highdensity, multi-protocol system supporting a variety of network interface devices. Designed for both carrier class and enterprise network applications where multiple points of fibre integration and secure network management of the fibre interface devices is essential.
- ION chassis can support up to two power supply modules which mount in the rear of the chassis. A single power supply can be used to power all the devices installed in the chassis; however the system can be made redundant with the use of a second power supply.
- Configuration options include an instant failover mode as well as a load-sharing mode.
- IONDCR-R1 is a field installable dry contact relay module for the IONPS-D-R1 power supply.
- This module mounts in the lower right-hand corner of the IONPS-D-R1 face-plate, allowing the power supply to be tied into a separate alarm circuit. Contacts will be activated on the loss of power, enabling an external visual or audible alarm.
- Applications for this type of fault alarm output would include enterprise networks as well as in industrial applications. The dry contact relay modules provides another layer of fault indicators, complementing network management software by providing a signal to either a local or remote alarm system.
Data Sheet
Specifications
Item | Description |
---|---|
Application | Up to 2 power supply modules can be used in the 19-slot ION chassis, ION219-D |
Status LEDs | PWR(Power): Indicates the power supply module is providing power to the ION chassis |
Power Input | 48 VDC (40-60 VDC) @ 5A |
Environment | Operating: 0°C to 50°C |
Compliance | UL Listed (UL60950), FCC Class A, CISPR Class A, CE Mark |
Warranty | Lifetime |
Ordering Information
Order Code | Description |
---|---|
TN-IONPS-D-R1 | Redundant -48 VDC Power Supply Module for 19-Slot ION Chassis |
TN-IONDCR-R1 | Dry contact relay module for DC Power Supply |
TN-IONDCR-R1 | Dry contact relay module for DC Power Supply |