DC Power Supply Module for the ION 6-Slot Chassis


  • DC power supply module for use in the ION106 chassis, which is an intelligent, multi-service integration platform that offers first-rate solutions for integrating, optimizing and navigating networks. By cost-effectively integrating copperbased equipment into a fibre infrastructure, the ION Platform equips networks for the bandwidth, distance, and security demands of today, tomorrow, and every point in between.
  • Designed for service providers, data centers, and core network applications, the ION Platform provides the secure network management of fibre interface points required for both carrier-class and enterprise-class services.
  •  ION 6-Slot Chassis can support up to two hot-swappable power supply modules which mount in the front of the chassis. A single power supply can be used to power all of the slide-in modules installed in the chassis, additionally; the system can be made redundant with the use of a second AC or DC power supply.
  • In this configuration, the power supplies operate in an instant fail-over mode. Management and configuration of the power supply modules is available when the IONMM management module

Data Sheet


Item Description

Up to 2 power supply modules can be used in the 6-Slot ION Chassis, ION106

Status LEDs

Power On LEDs for each installed power supply module are installed on the frame of the ION106 chassis


Width: 1.63" [41.4 mm]
Depth: 3” [76.2 mm]
Height: 9.75” [247.7 mm]

Power Input

-21 to -72 VDC and +21 to +72 VDC input


Operating: 0°C to 50°C
Storage: -40°C to 70°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft. (with de-rating)


UL listed, EN55022 Class A, EN55024, CE Mark, FCC Class A, CISPR Class A



Ordering Information

Order Code Description
TN-IONPS6-D Redundant DC power supply for ION 6-Slot Chassis, -21 to -72 VDC and +21 to +72 VDC Input

More Information