1 Port PoE+ Mid-Span Injector

TN-L1000I-AT

Image

 

 

  • 1-port 10/100/1000Base-T PoE+ mid-span injector
  • Simple, cost-effective & fully IEEE 802.3at compliant
  • PoE+ enabled network devices, such as PTZ dome network cameras, can be powered without the need to install power outlets
  • Allows IP phones, wireless access points, and security network cameras to receive power, along with data, over standard Ethernet cables
  • Easier installation in areas where power cabling and outlets are unavailable,
  • reducing installation costs.

Overview

Transition Networks L1000i-at is a 1-port 10/100/1000Base-T PoE+ mid-span injector which provides a simple, cost-effective, fully IEEE 802.3at compliant solution to upgrade existing infrastructure with PoE+. Powering PoE+ enabled network devices, such as PTZ dome network cameras, can be done without the need to install power outlets and electrical cabling. PoE technology allows IP phones, wireless access points, and security network cameras to receive power, along with data, over standard Ethernet cables, leaving the network infrastructure completely unaltered. PoE technology also allows for easier installation in areas where power cabling and outlets are unavailable, thereby reducing installation costs.
Mid-span injectors offer users the ability to take advantage of PoE technology while protecting investments they’ve made in purchasing, configuring, and deploying non-PoE supported devices such as standard Ethernet switches.

Image
PoE power injector

Data Sheet

Specifications

Item Description
Standards

IEEE 802.3; IEEE 802.3U; IEEE 802.3ab
IEEE 802.3af; IEEE 802.3at

Ports

DATA IN RJ-45 Ethernet Port
DATA OUT PoE Injector RJ-45 Ethernet Port

Status LEDs

AC Power
Feeding Power

Cable Requirements

10Base-T: 2-pair UTP/STP Cat.3,4,5 cable EIA/TIA-568 100-ohm(100 m) 100Base-TX: 2-pair UTP/STP Cat.5 cable
(Cat. 5e recommended); EIA/
TIA-568 100-ohm(100 m) 1000Base-T: 4-pair UTP/STP Cat.5e or above cable; EIA/TIA-568

Dimensions

Width: 2.65” [65 mm]
Depth: 5.51” [140 mm]
Height: 1.42” [36 mm

Power Input

AC input voltage range: 100 – 240 VAC;50 – 60Hz 0.72A

Power Output

55V @ 0.6A

Environment

Operating: 0°C to 40°C
Storage: -40°C to 70°C

Compliance

Safety: UL, cUL, CE/EN60950-1
Emissions: FCC Class B, CE Mark

Warranty

Lifetime

Ordering Information

Order Code Description
TN-L1000i-at 10/100/1000Base-T port PoE+ Injector

More Information