M.2 Gigabit Ethernet fibre network interface card

TN-NM2-GXE-2230-LC-201

Image
  • M.2 Gigabit Ethernet Fibre Network Interface Card (NIC) provides a fibre optic interface for the Dell OptiPlex™ 7060, 5060, and 3060 Micro PCs. The NM2-GXE-2230-xx-201 Series consists of a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “E key” interface, a fibre optic adapter that installs into the OptiPlex Micro PC’s Option port, and a 20-pin Flat Flex Cable (FFC) that connects the NIC to the fibre adapter.
  • The fibre optic adapter is available with either a 1000Base-SX LC connector or an open SFP (SFP module sold separately).

Specifications

Item Description
Standards

IEEE 802.3-2012

Bus Slot

M.2 - ‘2230-D4-A-E’

Dta Rate

1000 Mbps (full duplex only)

Max Frame Size

9014 bytes

Status LEDs

LINK/ACT ON

Dimensions (M.2 NIC)

2230-D4-A-E
Width: 0.87” [22 mm]
Depth: 1.18” [30 mm]
Height: 0.12” [3.08 mm]

Dimensions (Fibre Interface)

Width: 1.65” [42 mm]
Depth: 2.05” [52 mm]
Height: 0.51” [13 mm]

Dimensions (FFC Cable)

Length: 2.99” [76 mm]

Software Support

Windows 10, 8, 8.1, and 7 (32/64 bit); Linux

Power Consumption (LC)

250mA @ 3.3V (0.8 Watts typical)

Power Consumption (SFP)

120mA @ 3.3V (0.4 Watts typical without
SFP module)

Power Source

M.2 interface connector: 3.3V

Environment

Operating: 0°C to +45°C
Storage: -40°C to 85°C
Humidity: 5% to 95%
Altitude: 0 – 10,000 ft.

Compliance

CE Mark; Emissions: EN55032,
FCC Part 15 Class B; Immunity: EN55024

Warranty

Lifetime

Ordering Information

Order Code Description
TN-NM2-GXE-2230-LC-201 1000Base-SX 850nm multimode (LC) [62.5/125 μm fibre: 220 m/722 ft.] [50/125 μm fibre: 550 m/1804 ft.]

More Information