10/100BaseTx fault tolerant redundant link protector

TN-SBFTF1010-130

A 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections.
Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path.
It is a smart device that will not send any signal on a path that is inactive.
If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds.

Item	Description
Standards	IEEE 802.3
RJ-45 Connectors	Type: 8-position, RJ-45 receptacle: 1: TX+5: NC (no connection) 2: TX-6: RX- 3: RX+7: NC (no connection) 4: NC (no connection) 8: NC (no connection)
Dip Switches	SW1: Auto-Negotiation Enable/Disable SW2: 10/100 Mbps SW3: Full/Half-Duplex SW4: Redundancy/Switch
System LEDs	Power (PWR) Primary (PRI) Backup (BKP)
Port LEDs	Green indicates 100 Mbps; Orange indicates 10 Mbps; Green indicates full-duplex; Off half-duplex
Dimensions	Width: 3.25” [82.55 mm] Depth: 4.8” [121.92 mm] Height: 1" [25 mm]
Power Input	120 VAC @ 60 Hz. 100 – 240 VAC @ 50 Hz.
Power Output	12 VDC, 0.5 Amp 12 VDC, 1.25 Amp
Environment	Operating: 0°C to 50°C Storage: -15°C to 65°C Humidity: 5% to 95% Altitude: 0 – 10,000 ft.
Compliance	Safety: Wall Mount Power Supply: UL Listed & CSA Certified; FCC Class A, EN55024, UL 60950, CE Mark
Warranty	Lifetime

Order Code	Description
TN-SBFTF1010-130	10/100Base-TX Link Protector Transceiver (3) 10/100Base-TX (RJ-45) [100 m/328 ft.]

Product Category