TN-SGPAT Series

Image
10/100/1000Base-T PoE+ PSE to 1000Base-X  Gigabit Ethernet PoE+ Media Converter

10/100/1000BaseT PoE+ PSE to 1000BaseX Gigabit Ethernet PoE+ converter

  • SGPAT Series is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, that easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE+ power through the copper RJ-45 port.
  • Being a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fibre optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3at PoE+ standard, which is also backwards compatible with the IEEE 802.3af PoE standard.
  • Converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features.
  • Other features include over-current protection, under-current protection, and fault protection input.
  • Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fibre or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected.

 

Technical

Spec Text
Standards

IEEE 802.3-2012; IEEE 802.3af; IEEE 802.at PSE-PoE+IEEE 802.3U
IEEE 802.3ab; IEEE 802.3z; IEEE 802.3x; IEEE 802.3az

Switch Features

Max Packet Size: 10,000 bytes
Max MAC Addresses: 8k
Shared buffer memory: 1Mbit

Dip Switches

Switch 1 Port 3: SFP Mode Up=100/1000 or Down=SGMII
Switch 2 Port 4: 2nd SFP Mode Up=100/1000 or Down=SGMII
Switch 3 ALPT: Up=Disabled or Down=Enabled
Switch 4 Redundant fiber mode: Up-Normal or Down=Redundant
Switch 5 Revertive mode: Up=Revertive or Down=Non-revertive
Switch 6 2x Converter mode: Up=Disabled or Down=Enabled

Status LEDs

PWR: Power being applied to converter
PoE+: PoE+ Status
TP – Left LED per Port.
TP – Right LED per port.
Fiber L/A – per port.

Dimensions

Width: 3.25” [82 mm]
Depth: 4.8" [122 mm]
Height: 1” [25 mm]

Power Source

External AC/DC 56VDC power adapter

Power Consumption

56VDC, 1.17A, 65.5 Watts (assumes both PoE ports are delivering the full 30 Watts)

Environment

Operating: 0°C to +45°C
Storage: -40°C to 85°C
Humidity: 5% to 95%
Altitude: 0 – 10,000 ft.

Compliance

EN55022 Class A, EN55024, CE Mark, Power Supply is UL listed

Warranty

Lifetime

Ordering Information

Order Code Description
TN-SGPAT1013-105 10/100/1000Base-T PoE+ [100 m/328 ft.] to 1000Base-SX 850nm multimode (SC) [62.5/125um: 220m / 722 ft.] [50/125um: 550m / 1804 ft.]
TN-SGPAT1039-105 10/100/1000Base-T PoE+ [100 m/328 ft.] to 1000Base-SX 850nm multimode (LC) [62.5/125um: 220m / 722 ft.] [50/125um: 550m / 1804 ft.]
TN-SGPAT1040-105 10/100/1000Base-T PoE+ [100 m/328 ft.] to 100/1000Base-X Open SFP Slot
TN-SGPAT1040-205 10/100/1000Base-T PoE+ [100 m/328 ft.] to 100/1000Base-X Open SFP Slot
TN-SGPAT1040-305 10/100/1000Base-T PoE+ [100 m/328 ft.] to (2) 100/1000Base-X Open SFP Slot

More Information

Data Sheet
Product Category